Quantcast
Jump to content


Recommended Posts

Posted

My Dad has a Kubota and recently bought a winch. We have the wiring figured out, but he wants to be able to use it at either end (winch is mounted to a hitch receiver). Is there any type of inline plug that we can use instead of having to basically rewire it any time he needs to use it? It would be a carry it to one end, plug it in and use it, unplug it and put back in the toolbox deal.

Any help would be appreciated.

  • 4 years later...
Posted

I have seen quick connects for winches in automotive mail order catalogs, but since my memory is shot, I forget whether it was Summit Racing or JEGS, or....?  Another possibility might be 4x4 off-road catalogs.  The good news is that almost all of these catalogs are free if you ask in their web sites.  Good luck!

  • Like 1
Posted

Deano

  • Newbie
  •  
  •  
  • Members
  • 0
  • 1 post

My Dad has a Kubota and recently bought a winch. We have the wiring figured out, but he wants to be able to use it at either end (winch is mounted to a hitch receiver). Is there any type of inline plug that we can use instead of having to basically rewire it any time he needs to use it? It would be a carry it to one end, plug it in and use it, unplug it and put back in the toolbox deal.

Any help would be appreciated.

:)  

  • 3 weeks later...
Posted

Look in the marine/boating section and look for an electric trolling motor plug. They are heavy duty and will carry a lot of amps, also moisture resistant. They do come in various load ratings but the heavier ones would easily handle the current from a winch. The one I have on my boat is rated for 40 amps, much more than any atv/utv battery can put out.

  • Like 1
  • Alex changed the title to Kubota Winch install

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • By Mitch13
      2022 Coleman 400 with 13 hours on the engine and the mice got to it. Every wire coming out of the steering column in one cluster has been eaten through. I tried reconnecting matching wire colors to each other and I get the left turn signal and hazards to work, nothing else. If I play around a bit I can get the horn to honk or headlights to come on but only when I connect them to the brown wire. Obviously I don't know what I am doing here. Does anyone have a picture of how these wires are connected when they are under the hood on the drivers side coming from the steering column?
      Gray - seems to carry power
      Brown - left turn signal
      Green with purple stripe - hazards?
      Pink with red stripe - horn?
      Green - head lights?
      Yellow - head lights?
      Yellow with red stripe?
      Blue?
      Dark green?
      There is also a bundle hanging under the hood not connected to anything green with yellow strip, brown and blue?
      Other than that issue, I am about ready to sell this for parts if you interested let me know.
      Thanks
    • By fikey
      I am about 6 months in to owning my 520. It is used mainly to run back and forth to our barn and shop. Occasionally, I run it up and down a few fairly steep hills on the property. One day, as I was going up one of the hills, the motor started sputtering and a tremendous amount of smoke was coming out of the exhaust. I was near the top and it made it (sputtering) up. Once back on the flat, I made it home. I loaded it on the trailer and took it back to the dealer. They said they checked everything out and found no issues. Over the next month or so, I only had occasion to go up hills once or twice with no issue. Then one day, again as I was going up a hill, the engine sputtered, giant plume of white smoke and then the engine died. 30 seconds later, started up and made it to the top. Repeated the route (down and up) and the same thing happened again. Called the dealer and their head of service said he would come out and wanted to see it first hand. He came out a few days later and repeated the route several time and it never happened with him in it. I had videoed the whole thing on one of the times it happened to me, but since it happens intermittently, could not produce it when he was here. I told him that I had checked the temperature, the oil level and the antifreeze level after each occurrence and they were normal. I asked him to call Kubota and ask what the possibilities were and that I am not fond of it dying on the hill and blowing the smoke and I didn't want to wait until something catastrophic happened to figure it out. When I followed up, they had no answers (which doesn't exactly please me). Any ideas? The attached photo was the start of the smoking. Didn't know how to upload the video of the whole thing, but it fogged the whole area.

    • By brewski
      I just purchased a 2025 kubota rtv 1100 x cab esd esnting to install light bars on the roof it appears to be prewired for lights how do lights mount and what kind of switches do i need
    • By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











×
×
  • Create New...