Quantcast
Jump to content

NUB looking at a Trooper and would much appreciate some input.


Sako7STW

Recommended Posts

Hello all. New to here but not to Joyner. I bought my kids a 250 Sand Viper a few years back. While not perfect, it was a good ride and they loved it.

Now I am in the market for a sxs and have found a possible lead on a cherry used T2. I have always been intrigued by the Trooper. It has alot of features I only wish the big manufactures had but I have a few questions.

Is the clutch reliable? I love the idea of no CVT but how often do you have to replace the clutch and if you do, how hard are the parts to find?

Do you find the suspension lacking in travel and shock performance? I seen McCoy has King Shocks for an upgrade, are there others that are a little more affordable?

How does the Trooper do in the dunes? I know it is heavier than the others and that has to hurt some performance but I also see where when headed to the dunes, it could go on a serious diet.

Link to comment
Share on other sites

System locked up on me....

I also wanted to ask, What are the must do mods to the machine before even leaving the garage? Think reliability and safety here.

What performance mods would you do?

If I get a loan on this machine I could get enough to do a few mods to it like power steering and maybe the ECM or whatever it is I read about on here. If I haven't made my wife mad enough buying it, maybe even go turbo. I am a bit of a power head LOL.

Thanks for any advice in advance.

ohh and P.S. Is Joyner fully running now so parts are readily available again?

Link to comment
Share on other sites

I just found the add again and it is a 08' model year. Is this good or bad? I think I could get it for $6,000. Low miles, the nice front windshield, new tires, and snow plow. Probably a few other things but that is all I can tell from the pic. I haven't got to talk to the guy yet as he was headed to work and exchanged a few quick texts.

Link to comment
Share on other sites

those are all good questions but some of your mods are gonna depend on your mechanical skills and ability's and what u need for were you wanna ride. I would say first upgrade make sure the front and rear diff has been upgraded they dont hold up I had to do mine and I didnt have many miles on it or ride as hard as others do. I would also make sure you have some kind of snorkle the factory air box is terrible. And do some water proofing with the ecm and fuse box and electrical connectors. I also did the steering box loosnes fix kit think there is still one on ebay. The suspension factory sux at best the shocks are heavy and at first it seems good but it can be improved a lot. I run air shocks but its not for everyone. the king shocks are awsome but its a big price. I would but 30" tires on it thats probally one of my favorite mods made the gearing so much better. there is a lot of cool people on here and info.

Link to comment
Share on other sites

the bolts that hold the rear diff and front diff together inside are not strong enough. specifically the bolts on the ring gear inside the housing theres a lot info here about it. Sometimes you can just replace the bolts with new stronger ones and make sure nothing is worn out I had to have mine reshimmed but mine actually BROKE. I have fox 2.0 8.5 travel front air shocks from fox I have about 11-12 inches total wheel travel. The rear is sway away (racerunner) thats the company they are 2.5 10" travel I believe. I do all kinds of riding lots lower speed stuff If i was hammering whoops id probally would have done something different. but they work fro me and the ride is great

Link to comment
Share on other sites

If you do mostly dunes I would not buy a trooper. I love mine but I don't go to the dunes often. It does great in 1st gear for short climbs but not tall dunes you have to attack with speed. If you shaved 300lbs off it would be much better, but you are still stuck with a manual gearbox. There are ratio gaps between gears unlike a CVT which by design optimizes the hp & torque to the wheels. On the positive you don't have to worry about a blown belt.

If you get a turbo it will go up almost anything, but then reliability will suffer.

Stock suspension is junk unless you just putt around dirt roads.

Parts availability is pretty good. Especially since you can buy many parts at the local auto parts store.

Link to comment
Share on other sites

Definitely snorkel and better air filter, definitely replace the bolts in the differentials' ring gear, I cut mine in half and added 4 inches, great for me, power steering is well worth the money, I like traction treads like the http://ssl.delti.com.../GRABBERAT2.jpg, they last a lot longer than the stock tire, figure out some way to keep the grease in and dirt out for all you hiem joints, other wise, they'll be squeaking and noisy in a month.

Clutch is good, no worries. My Trooper does OK in the dunes, Utah's Little Sahara Dunes, not as well as my son's RZR though, but I have fun.

Where are you at?

Read through the pinned threads, especially the Parts, Pieces and Info one.

Lot of good info can be found amongst all the verbage here, enjoy

Kinarfi

Link to comment
Share on other sites

I am not far from you Kinarfi. I am in Mountain View WY. On your way to Flaming Gorge. Alot of my riding will be up here tooling around in the desert and the mountains. Will use it hunting for sure. I might make it to the dunes once a year, maybe twice if that. Mostly Little Sahara or the Killpecker Dunes North east of Rock Springs.

So I talked with the guy today and he is to be sending me some more pictures but here is the list he has done to it:

Brand new set of Ripsaw 27" tires http://www.sedonatires.com/product/rip-saw-rt

Snow plow (big bonus for me, I need it)

Aluminum custom made roof

Aluminum custom made windshield with safety glass, not plastic

Lexan rear window

Automotive style muffler to quiet it down for hunting (removable, but yet a plus for me)

CD player and speakers

New CV boots all the way around.

Aprox 1200 miles

So what would you think this is worth?

Link to comment
Share on other sites

Wrote this last night, but didn't get it posted, I used to like in Mnt View, but it was the one by Casper, but my wife says it was on Mnt view dr in Mills a hundred years ago,. Also lived in Rock Springs, so I'm a little familiar with what you'll be riding on, If you didn't already those wicked looking tires, I'd suggest something like what I have, they've lasted several years, I haven't found a windshield that does not act like a dust vacuum, so I don't have one, maybe the rear window fixes that. If you plan on listening to music, you have a good start with the muffler, but your snorkel will need a silence on it too, or you might be able to figure a way to put the filter up front, I was surprised by how much noise comes from the intake. I have over 16000 KM on mine so far. but I had to do a re-ring early on because of the junk filter, look for a fine dust down line from the filter, BAD, also, if you can do a compression test on it do so, an indication of low compression is hard to start when cold, but once started and warm, it's good until it gets cold again, I used to park on a hill just so I could get it started on cold mornings while camping.

I don't really know what it would be worth, good luck with that, I have been wanting to revisit the Killpecker dunes, Steam Boat & maybe even visit the Tri-Territorial monument again, maybe we can meet up in the future.

Kinarfi

Oh yea, there is or was a trooper in Kemmerer and another in that area also.

Link to comment
Share on other sites

All IMHO!

First, $6000 is way too much for an '08. The '08 had to have a lot of upgrades. How do I know? I had one.

Second, Don't buy a Trooper unless you like working on it almost more than you play with it. They are not reliable!

Third, The clutch is great and is not a trouble point unless you don't know how to use a clutch correctly!

Fourth, Lousy in the Dunes without a lot of mods & $.

I had a Trooper & a second one for parts. Finally got tired of working on it and sold them. JMHO!

rocmoc n AZ/Mexico

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By hdtran
      Hy (pronounce he), just bought a Hisun Sector E1.
      I'll be using it to haul logs and stuff in the Sangre de Cristo mountains.
    • By Ermd ttk
      Hello friends,
      I got my ODES Ravager UTV yesterday and after a couple of hours of driving when I go downhill I heard a strange loud noise a couple of times, like a gear skipping or maybe something from the differential.
      It doesn't always happen and when it does it is heard for a few seconds and then it goes away and everything works normally, I'm worried if there could be some major malfunction or what could be the problem if someone can help me?
      Thanks a lot.
       
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
×
×
  • Create New...