Quantcast
Jump to content

Howdy from Tejas Off Road Racing Association


TORRA

Recommended Posts

Good morning all,

My name is Bryant and I'm the co-manager of an off road race series here in Texas that provides off road desert and endurance short course style racing for two classes of UTVs.

We offer a stock and a Pro UTV class to allow an opportunity for most every UTV owner to try their hand at desert style racing.

Our courses range from 10 to 100 miles long and races cover multiple laps.

We look forward to having some of you come race with us!

Here is a link to our website where rules can be found along with upcoming events.:

TORRA

Our goal is to get people out of the stands and onto the course by providing frequent and affordable racing options.

Come on out and #makesomedust!

  • Like 1
Link to comment
Share on other sites

7 minutes ago, Travis said:

I have an 2001 kawasaki mule 550 that im rebuilding i could race stock.    

Do it!

A lot of our racing is more about endurance than speed so the machines that have fewer break downs, flats, broken parts can do better!

That said we do have a lot of stiff competition in our Stock class!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Rusty Beavers
      I'm working on a Coleman UTV 400 that has a rough idle, owner has had it for about a year. When I say it has a rough idle, it doesn't have the continuous smooth running sound. At times you can hear it kinda skip, sputter, or like the RPM has fallen (RPM stay constant according to the gauge) It's not as bad as it was after I replaced the fuel filter and fuel injector (both are Chiki) not sure if that is a quality brand at this point. Checked the spark plug, it was a little foul, but not too bad. (Since the engine is still idling bad I'm going to replace that) Cleaned the throttle body making sure the carbon and soot has been removed, and the air-filter has been cleaned. New fuel is being used so it's not old or been standing. They did tell me that they were using non-ethanol fuel, not sure if that would be causing the issue. Next two things I can think of that maybe the issue is the O2 sensor or the valves need adjusting.
      Thoughts and suggestions? Thanks in advance.
    • By Irons
      Hopefully this helps somebody because I couldn't find any info on this runaway condition.

      Drove 1/2 mile to the gas station and when I started up to leave the starter stuck on. Turn key off starter is still running~! Limp it home wondering what the heck to do, get it in the garage and pull the negative battery terminal to get it to stop. Whew, WTF?

      Calm down and start checking things, starter is hot of course but nothing is smoking and nothing smells burnt. Pull battery cover off and start checking wires from battery to relay and relay to the starter. OK good nothing is hot, nothing is crispy and nothing is melted. Probably smoked the starter though. If this had happened to my wife and I wasn't around the machine would have run until the battery died and probably melted down/burned.

      I'll get to the point to save you folks some time and trouble. Because this is a kymco machine you need 2 different Kawasaki parts to make this repair, and information is scarce to say the least. The switch and a sub harness to connect it to the machine's plug.

      Everything works now, but the starter sounds horrible so I'll be changing that too before spring.

      Good luck out there and hopefully this is just a freak occurrence, but if I were you I'd get rid of this kymco part and put the Kawasaki replacement in now.

      Switch, Magnetic is part number 27010-0767
      Sub Harness Start Relay is part number 26031-Y034
       
       

    • By UTVSurvey
      Hello! I am a University of Notre Dame student and have been enlisted by Lippert Components INC. to help them understand you, Side-by-side users. Taking the survey in the link below would help us to help you in improving the buying experience of Side-by-sides. Thank you so much for your attention and participation.   https://nd.qualtrics.com/jfe/form/SV_aYrwsZyjs2ZHK3I
    • By Wesley
      I have a 2022 500 Hisun product, I have had them in the past. I change my oil myself and trying to drain through the hole where I remove the plug is a mess.  How does everyone keep the belly pan clean during the oil and filter service?
       
      Wes Jackson
    • By shepdog
      I just picked up a 2009 bmx utv 500, there is a small 'nipple' on the water pump, its barbed like a hose goes on it , where is that little hose Suposed to go? 
×
×
  • Create New...