Quantcast
Jump to content

Cub Cadet Diesel UTV key on no lights and wont start


Recommended Posts

Thanks for your help, Iv looked for one for hours a day, no luck an the Cub Cadet boys won't send me one like its a top secret thing lol .. you could be right but I'm unable to find anything not connected or corroded to many wires and color coding is not true .. frustratingly lost at this point I may have to take it to Cub Cadet .. grumbling!! Im sure that'll cost me but gota have it for winter hauling wood and cleaning snow from the driveway

  • Like 1
Link to comment
Share on other sites

To find out which wire goes to the battery, use a continuity test. With the battery disconnected, and the key in the off position. Using a multi meter, set to ohms, run a jumper from the positive battery terminal, of the disconnected battery. Hook the jumper wire to one end of the meter, then probe all the terminals on the switch with the other. When you get a reading, there shouldn't be much difference between this reading, and just touching the meter terminals together. There'll probably be some difference, but not much. Then turn the key on, and find the next wire, that'll be the one that's always hot when running. Then the start wire is last. That should just about cover most of the wires on the switch, so you can track down the problem. 

   But from what I've read so far, it seems like a ground wire problem. But if you can't get continuity at the switch then it's obviously a problem on the positive circuit.

  • Like 2
Link to comment
Share on other sites

@kenfain we tried that even tried a hot from battery still no power to the switch we can get lights to come on that way but nothing else .. chasing the wires is a task because there's so many and no slack in them what are friends for .. well they slip out with beer an tools and....... nothing lol we can't find the problem .. patients is at it's end haha I better drop it off at cub cadet before I push it over the hill .. everyone thinks its a secret relay hiding somewhere but no luck there either .. we're all baffled at this point  

  • Like 1
Link to comment
Share on other sites

just a thought, check the main inline fuse from battery. turn key to on position and give the wires a good rattle. I had a similar intermittent problem and could hear sparking across the fuse... changed the fuse and a clean up then no more problems.

my symptoms were clocks coming on and numbers flickering then nothing... no click no lights etc. and battery running flat because not charging. 

Keyif 

Link to comment
Share on other sites

@keyif .. good idea and we already tried that, nothing .. its still sitting waiting for me to take it in to get worked on (guy side swiped me totaled my truck and trailer, trucks back I'm still cutting and welding on trailer to replace fender and axle) but between normal work an my other 2 experimental projects (deff not the kindof talk of this thread or board) and cutting wood to keep from freezing this winter I'm to busy to work on it now .. my friends still come over with a light bulb above their head smiling -> HEY I GOT AN IDEA!!! lol

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

It probably is one of the rely's .  It was my problem.  I have been running mine wired on the one good rely.  I just have to make sure the headlights are off when I cut it off or the way I have it wired cutting off the switch doesn't cut off the headlights also. They stay on and I have to cut them off with the light switch.  For safety I put in a toggle switch that kills everything.  Before that I had someone turn on the headlights while I had it parked just about killing my battery. I was lucky it turned over just enough to get me started again. I haven't replaced the rely's yet because I don't know what caused them to go bad suddenly. I think I may have a short somewhere in the wiring. Looks Like I had a rat or squirrel or rat chew some of the wiring. Works and runs well on one rely, but know I'm pushing my luck. My charging system seems to be erratic since though. Sometimes my hour meter works and sometimes not. When it is working my battery is charging when it doesn't battery isn't charging. I hook a battery tender on it when parked and I haven't had problems with the battery cranking as long as the headlights aren't used for to long. At my age I don't do much night driving. 

 

Best of luck!!  Will be watching for the results in your search of a fix!!

 

John Taylor

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • By htrotte
      While troubleshooting an issue with temp warning light I discovered another temp switch mounted in the pipe going to the head  The two switches are literally 6 inches apart.  Does anyone know what this third switch is used for?  If i can figure out how I will post pictures.
       
    • By sister sweety
      Thank you for adding me, I am the owner of a 2021 axis 700 UTV and also a 2023 Can-Am defender UTV

    • By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • By ATRican
      Just got a 2024 Odes Junglecross 800 cc four door 5 seater today. Feel free to share advice on longevity tips and common failures of this model.
      AR
×
×
  • Create New...