Quantcast
Jump to content


Heater and doors

Strperday

By Strperday
in Yamaha UTV SxS Forum

 Share

Recommended Posts

Strperday Rookie

Strperday

Posted
Posted

I have a 2014 Viking that I recently bought off EBay.  I'm looking to put a heater in it and was wondering if you guys could give me a good recommendation on what to buy?  The Viking already has a hard roof and a windshield.  I would also like to buy some full doors to keep the heat in but don't really know where to start.  I'm not loaded with money either which is why I bought a used Viking.  Thanks for the help. 

Strperday Rookie

Strperday

Posted
  • Author
Posted

I just ordered a Firestorm UTV Cab Heater and it should be here by this Friday.  I really hope it heats well as my girls will not ride if its to cold.  There are way to many Viking covers out there to chose from and I'm not real sure which one I should buy or which one I really want.  I would like to have a cab that is simple to remove and install.  I don't want to pay a lot of money which is typical I guess.  However I don't want something that is going to rip and shred after a year of usage either.  Iv been reviewing/looking at the "Side X Side Enclosures".  Does any one have any experience with this removable cab?     

brostar Proficient

brostar

Posted
Posted

Steperday, we can help you with a set of Doors for your Viking. To fully enclose your cab you will need a Doors and Rear Window combo. If you want to keep the price down, our soft Doors and Soft Rear Window is your best option.

Our prices are/

Soft Panels

1 X Set of Yamaha Viking Soft Doors $324.99

1 X Set of Yamaha Viking Doors and Rear Window Combo $489.99

Extras: Zip Open Windows in both Doors $35.00 - Zip Open Window in the Back Panel $35.00

 

Hard Panels

1 X Set of Yamaha Viking Hard Rod Doors $949.99

1 X Set of Yamaha Viking Hard Steel Doors $1595.99

1 X Lexan Back Window $359.99

Extras: Dual Vent in the Lexan Back Window $10.00

Discount for UTV Board members on all products 5%

http://www.pacificeagleutv.com/yamaha-viking

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • Fmaxiron
      Honda Pioneer 1000-6 back windshield or screen.
      By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • Rmillerdesigns
      Massimo Msu 500 Has No Power
      By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
    • MilSurpYinzer
      Must have upgrades/spares?
      By MilSurpYinzer
      Hey all, I was just wondering what you guys consider a necessary upgrade or spare part to have or mod onto your machine.
      I'm going for a kind of shtf survival rig that's not going to be SUPER heavy and I'm looking at getting:
      A spare belt (I keep seeing this mentioned everywhere I look so it must be important)
      A spare tire and mount( So would I need a jack like one from an old jeep or something else?)
      Tire chains for the winter
      And maybe a cargo bed upgrade so things don't slide out.
      Bumpers because duh.
      I already installed high output lights and have a windshield, roof, back window, and winch. And I outfitted a Molle panel for the back of my passenger seat with extra supplies like food, first aid, and spare mags.
      Any advise on increasing durability, longevity, and having something on hand because it's absolutely necessary would be a plus.
      Thanks so much!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...