Quantcast
Jump to content

A little confusion...

Travis

By Travis
in Kawasaki UTV SxS Forum

 Share

Recommended Posts

Travis Grand Master

Travis

Posted
Posted

Once i get the cylinder honed, the only remaining problem is the crankshaft shim..  And i have a few questions.

1. In the manual it gives a solution to the problem i'm having of the crank NOT spinning when the cover on (by hand).

2.  And i just can't wrap what's left of my brain around the instructions, i guess use a caliper to measure? (instructions  circled in red)

 (my brother has been helping me, he's fairly knowledgeable with this stuff, but more Diesel engines than anything) and he says to use a dial indicator set up, and to use this* as a spec for end play. and that would help us get the measurements needed in picture #2.

1st pic is the runout. But is it the same as crankshaft end play? 🤔

MULE1.PNG.dc28869aa213ef6171b23dd867e4c704.PNG

2nd pic is of the instructions (solution) to get the correct shim.

 I don't know, maybe this makes sense the way i wrote it.

 Thanks, Travis.MULE2.thumb.PNG.790078c069e0aa803bd45fadc9ff522c.PNG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Travis
      Kawasaki Mule 550,520,500 Complete service manual
      By Travis
      View File Kawasaki Mule 550,520,500 Complete service manual
      This is a complete service manual for the Kawasaki Mule 500,520 and 550 models.
      Topics  covered include Brakes, Steering, Electrical system, suspension and fuel system. As well as engine repair procedures and Transmission/Final Drive procedures.
       
      ********************************************************************************************************************************************************************************************
      If you need more information about the engine this manual linked below is chock full of information.
      Thanks goes to @cliffyk for getting these files all  into one PDF format for uploading.
      Submitter Travis Submitted 04/18/2021 Category Kawasaki  
    • AndySwish33
      2023 T Boss 550 few questions
      By AndySwish33
      Brand new t boss 550. couple of questions. 
       
      1.  Do you need speakers in order to play music ?  Hooked my phone to Bluetooth no sound 
      2.  On screen registration.. it won’t let me fill in the info on the touch screen.  Navigation works but the registration portion does not 
      3.  Is there a data plan you can get or need ?  
       
      thanks everyone 
    • skittle021
      Super Weird Problem with Primary Shave/Clutch...
      By skittle021
      So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
      To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
      Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
      Photos: 
       





    • Richard shepard
      Only stays running when I throttle it dies at idle Colman 400 utv
      By Richard shepard
      I have a 2021 colman 400utv engine will start and idle, as soon as you hit throttle to move engine dies and will only start when you throttle it, let off throttle it dies, I replaced the injector and plug still the same, anyone have any other ideas
    • LindaCall60
      Need manual for teardown and rebuild 2011 hs 500
      By LindaCall60
      Purchased a 2011 bighorn banchee. Needs motor work. Not sure what. Husband is mechanic but not computer savvy. So, is there a manual that will tell him how to tear this down?  We have down loaded a service manual, but he says it doesn't tell him what he is looking for. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...