Quantcast
Jump to content


Joyner Trooper Power Steering

mixfixdave

By mixfixdave
in Joyner UTV SxS Forum

 Share

Recommended Posts

mixfixdave Enthusiast

mixfixdave

Posted
Posted

I had been wanting to install power steering on my T4 for years so I went to the salvage yard last weekend and bought a complete column (minus airbag) out of a 2009 Nissan Versa for $125 with the ECU.

It was a fairly simple install. The long shaft that fits to the Joyner steering rack actually fit perfectly into the Nissan column. Had to weld up a U joint on the Nissan column to make it a straight shaft and fab up one simple bracket. Connect power and ground plus a switched 12v and now I can steer with one hand!

91946288c74a5d990bad6a4da5bec532.png

 

  • Like 1
  • 4 months later...
mixfixdave Enthusiast

mixfixdave

Posted
  • Author
Posted

I wouldn’t deal with SB...he is always a pain in the ass for some reason the few times that I have ordered parts from him and everyone on the forum that deals with SB reports problems receiving parts or just getting ripped off completely.

I will post some better pics as soon as I can, but I can tell you that the Nissan Versa column was simple to remove in the junk yard and the only additional parts I needed for installation on the Joyner was a 6” piece of 1/2” angle and 18” of heavy wire to run for power from the winch 12VDC connections.

Oh, and I did have to weld up a U joint that was part of the Nissan linkage, but it was easy!

 

  • 2 months later...
scimaro Explorer

scimaro

Posted
Posted

@mixfixdave  thanks for the pics, sorry for the late response. I hadn’t noticed you had responded back.  

 

Right now im having problems with my trooper it wants to stall when I give it gas. So I’m working on fixing that currently.

 

thanks again 

 

Scott

  • 1 month later...
  • 8 months later...
  • 9 months later...
  • 3 months later...
Wolfpaak Apprentice

Wolfpaak

Posted
Posted

Hello guys, newb here. 

I own a 2004 Joyner Renegade R4 800cc and am wanting to add power steering to it and am wondering if the fix mentioned here would also work on my R4.

Thanks in advance for any help.

Kenny

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • Rmillerdesigns
      Massimo Msu 500 Has No Power
      By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
    • a4x4nutt
      U force 800 steering
      By a4x4nutt
      2021 uforce 800  turning radius is awful .
      I just bought it  added perfex lift 
      And 1.5 wheel spacers 
      The turning radius was bad before the lift .
      I looked for steering stops under the tie rod boots and steering knuckle for steering stops . Found nothing .
      Are the stops inside the steering rack ?  Is there a replaced steering rack with longer throw to curb this issue ?
      Any suggestions?
    • dragon
      2016 Kubota 1100 RTV Tilt Steering wheel locked Upper Position
      By dragon
      I need help I have a 2016 Kubota 1100 RTV my tilt steering wheel locked in the upper position after using the side release. The handle works but does not release the steering wheel to a lower position. If anyone knows and easy fix, please let me know any help is appreciated. Be Safe, Thanks!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...