Quantcast
Jump to content


Recommended Posts

Posted

I just purchased a Massimo MSU500 and no manual came with it so I have some questions. looking for part #'s and availability of basics like spark plug air and fuel filter. What is the valve adjustment specifications? 

  Is there a fuel drain? It's been sitting, low mileage but I want to drain out the old fuel and put fresh. 

Posted

Have you tried their website to see if they have a manual available? Some manufacturers do and some don't.

 You can always do a search for parts online as a lot of online stores sell aftermarket parts. Their website should have a search for dealer or service center that near you or just ask them how to get a manual.

  • Solution
Posted

Service is practically nonexistant from Massimo..but many parts are available on Amazon, ebay , Motorcycle Doctor..filters etc are plentiful and cheap.. i think mine used  plug NGK DPR 7EA9. No fuel drain that i am aware.pull the line .good luck..does it run at all now? Watch for overheating...common issue in hot weather

Posted

Thanks for the reply. It runs good now, I changed the injector, fuel filter and spark plug. Set the valves and out fresh gas in it. I found some FB pages with some action. This forum is pretty dead it appears. 

Posted

Used to be busy..kinda died out..glad you got it running well..i would recommend retorque head bolts.

Hisun just air tools them ..head gasket failures are common..watch for bubbles in recovery tank and water in the oil.  Enjoy ..after all the repairs on mine it has fun well..use it often.

Posted

 Any spec for head bolts? It has some top end noise I need to pull the side cover for the cam and check the chain. I was hoping it was just the valves noisey but I set them and it still has a rattle. Runs good and starts instantly. 

Posted

You need to run premium fuel..87 octane will knock..change the oil, be sure its wet clutch approved 10 w 40 or 10w30 or it will burn clutches. Dont recall the bolt torque. Try google..use LOW under 20mph and in mud or hills. Mine does well in mud..dont go in deep water, will get into trans cooling ran

Posted

Fuel's not a problem, local station sells Rec gas 90 octane non ethanol. I've read where a lot of people use Rotella 15w-40, that would be easy as I buy it for my diesels in 5 gal buckets. I have run it down the road but it will mostly be used riding around my property for chores.

Posted

Rotella is ok..just dont use an auto full synthetic..the friction modifier package will destroy wet clutch.they are a lot of fun..and handy with dump bed and winch. Thay can tow 1500 lbs too

Posted (edited)

It's a 2018 shows 78 mi. but there's been someone under the hood. Old guy, even older than me and I'm old, had it and didn't use it much parked in the garage. Think owner before him was a little rough on it.  They installed a fuel filter inline and there's some replaced non original bolts on the clutch cover. Someone has had the fan cover off also. otherwise it's all in working order. Steering wheel is crooked I'm going to do an alignment and see if I can get it straight adjusting the tie rods. Wasn't sure if the steering wheel was splined and maybe off a tooth or so.

Edited by Eman85
added info
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Topics

    • By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • By Debbie Hogan
      I realize this part is discontinued but im trying to find this exhaust pipe fir my dads 550.  His brother who has since passed bought this mule for my dad who is now 90 and he is trying to fix everything on it.  I'm willing to take a used one.  A new one would be great if someone still had in stock.  I'll take anything as long as it is in workable condition.   If anyone has any ideas for me im open to hearing them.  Thank you so much.
       
      Debbie fm  Texas
    • By HighSon
      Haven't posted in a while since solving the excessive cabin noise issue, so I thought I would share a few upgrades to my Sector... Realize that this is driven daily on the street, so some of the mods are to make it more streetworthy.

      Locking gas door.

      Rear view mirror.

      Modified windshield for better airflow in cabin.

      Lowered and modified headrest bar for improved rear view.  Tailgate protector.

      Folding armrests.

      Overhead utility rack.  Keeps the interior cooler and dryer, too!

      Folding rear seats.

      Dust cover and seat protector.
      If anyone wants links to the rear view mirror, seats, or arrests, let me know and I will post.  But know that everything requires some level of fabrication.  The utility rack was all custom built.  Cheers!
    • By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
×
×
  • Create New...