Quantcast
Jump to content

2017 cub cadet challenger 550. 4x4 and front diff lock won’t engage


Recommended Posts

I have a 2017 challenger 550 that will not go into 4 wheel drive. I’ve checked fuses, all are good, when I turn the key to on, and press the 4x4 button I can hear the actuator running , the front tires in the dash indicator light up as though it is engaged, but no 4 wheel drive. When I activate the front diff lock I can also hear the actuator but it does not show the x in the front axle on the dash. Any suggestions would be appreciated!!

Link to comment
Share on other sites

I needed to use the 4 wheel drive on my Challenger and it would not engage. I checked all the fuses and they are good. With the key in the on position and machine not running I can hear the actuator run when the switch is pressed, and the indicator on the dash lights up but it does not go into 4 wheel drive. The front diff lock actuator runs when it is pressed but the indicator x does not show up on the dash, any suggestions should be appreciated!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Steve B
      My "R" light on the dash will not go out when I take the UTV out of reverse and put it into any other gear. Is this just the light switch issue or will this effect engine performance in the other gears?
    • By Travis
      View File Kawasaki Mule 550,520,500 Complete service manual
      This is a complete service manual for the Kawasaki Mule 500,520 and 550 models.
      Topics  covered include Brakes, Steering, Electrical system, suspension and fuel system. As well as engine repair procedures and Transmission/Final Drive procedures.
       
      ********************************************************************************************************************************************************************************************
      If you need more information about the engine this manual linked below is chock full of information.
      Thanks goes to @cliffyk for getting these files all  into one PDF format for uploading.
      Submitter Travis Submitted 04/18/2021 Category Kawasaki  
    • By lonerider98
      At the end of last year my Coleman UT 500 will not go into reverse. I can hold it over toward the reverse to move it nut it won't lock into reverse. Anyone have this problem? Winter is just about over and going to have to get this resolved. Thank You!
    • By packersfan
      I have a hisun 500 got from a auction and when turning a corner left or right it's a two hand job then when you left go snaps back.any help on what to look at would be appreciated.
      Also blows blue smoke until she gets warm then it's ok 
    • By Richard shepard
      I have a 2021 colman 400utv engine will start and idle, as soon as you hit throttle to move engine dies and will only start when you throttle it, let off throttle it dies, I replaced the injector and plug still the same, anyone have any other ideas
×
×
  • Create New...