Quantcast
Jump to content


Recommended Posts

  • Alex changed the title to Joyner Trooper worst and best things
Posted

It all boils down to one's opinion.  Some don't like these mahines simply because they are from China.  Most of the stuff we get today comes from China.  Depending upon where you live in the US, parts and maintenance support is sparse.   You may have to be your own mechanic.  The Chery engine is apparently reliable (mine is).  John Deere and Kawasaki uses the 800cc version on one of their models as well as a host of other lesser known brands of SxS.  I prefer the clutch/5-speed transmission on the Renegade (and Trooper).  But you have to be proactive in managing power to the drive axles.  I like the independently selectable front/rear locking differentials and 4WD.  This machine is more like an automobile as far as the drive train goes.  I don't care much for the brake response - small diameter rotors leads to slightly longer stopping distances.  There hasn't been a safety recall on the Trooper or Renegade that I can find.  Other better known brands have had recalls.  There are tons of YouTube videos that show problems with belts burning out (CTV), broken axles and CV joints.  But that can also happen with any machine that is driven beyond its limits.  I don't think the Trooper or Renegade is designed to  go airborne over jumps.

Posted

Cons: Electrical system has been a problem. Fuse box has corrosion, short somewhere between lights and 4wd switch. Electrical system is exposed to water. Fuel gage is wrong, temp gage is wrong, Oil pressure light comes on at idle. Battery is draining after a few days. New ball joints worn out in just a few rides, no grease zirks. Rattles and bangs on rough stuff.  Sloppy steering box. 4wd switch cycles randomly. Have to remove seat belts to get to tool box under seat. Parts hard to get. Gutless engine. Shocks can't be rebuilt.

Pros: cheap to buy. No drive belts.

Posted

I bought a 2008 Trooper T2.  I live in the desert in Arizona.  My only issues with the trooper are the curb weight (1760lbs), and some minor electrical issues.  The weight of the machine almost makes it impossible to drive comfortably in washes.  The deep sand is a real problem for this machine.  There is only a 5a fuse controlling the lights, dash lights, turn signals, brake lights and all gauges.  That has to be split up.  The stock rocker switches corrode easily and need to be replaced with modern rocker switches which involves replacing the switch panels.  The 4wd switch is the first to go.  Replace it immediately and get ready for some tricky wiring when replacing the other switches.  Overall, for dirt roads and rough terrain including crossing some washes and doing some travel in narrow washes without much deep sand I am very happy with this purchase.  The unit is dependable and starts every time.  Oh yea the seat belts.....I replaced mine with 3 point seat belts ($60.00 pair) like the ones in my 91 jeep wrangler.  Work great and easy install.  No need to remove belts to lift seats.  The 5 point seat belts are a little overkill.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By Prepper
      I have been doing a little research on which engine oil is best for UTV engines.  There seems to be some disagreement over using a good quality regular engine oil, and the necessity of using "M2" (or wet clutch suitable) oil.  My understanding is the "wet clutch" suitable oil has less friction reduction properties (hence a more responsive clutch with less slippage).  While less friction reduction properties would seem to be better for the wet clutch... it would not be best for the internal engine parts like camshaft bearings and other moving parts where friction is detrimental and would lead to premature failure.  Some folks swear you need M2 oil, while others say they have been using regular motor oil for years and their clutch is just fine.  Could they both be right ???
      Any thoughts ?
       
    • By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • By Wolfpaak
      I think this part is causing a high idle problem(4000 rpm at start up) in my 04 R4 Joyner. I took it out and cleaned it and the problem went away. I just went out to start my SXS and it's idle jumped up to 4 grand again. Can someone tell me what this part is called so I can search for a new one. Or can you point me towards a source. 
      Thanks in advance. 
      Kenny


×
×
  • Create New...