Quantcast
Jump to content


Recommended Posts

Posted

I have a brand new Mule with less than 20 hours. Every time the weather gets below 10 degrees, the spark plug fouls out and the Mule won’t start. The dealer is aware of the problem,because the first time it happened he came to my farm with a plug and wrench in hand and it started right up. I don’t want to have to replace the spark plug every time it gets below 10 degrees. 

  • Alex changed the title to 2022 Kawasaki Mule fouling spark plug
Posted

I have a 2007 and plugs fouled pretty often as well. Thanks to this forum and Travis specifically they suggested a colder plug and made a big difference.

BPR4 I think,  was using a BPR5

  • Thanks 1
Posted

just went thru this with 2015 mule......seems choke was out of adjustment. which caused rich mixture, which fouled plug, which caused missing, stalling, hard starting.....................rule of thumb. keep several spare plugs and fuel filters in your tool box......this is getting to be an annual thing for me.........

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Topics

    • By mfitzner
      Cranks after installing a jumper wire to ignition switch to get power but will not start
      Have spark and fuel pump runs
       
    • By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


    • By JohnnyB
      My Massimo 500 will not start. I’ve checked all the obvious things. It turns over just fine. fuel, spark, fuse box are all good. I can’t figure it out. Any ideas would be greatly appreciated. Thank you.
    • By Pop Bob
      I’m ready to buy a second machine. I looked at a Gator and a Mule. They are larger than I want. Something more trail size will be better. That being said, I do not wish to purchase from a big box store again. Can anyone recommend a good dealer who sells Hisun based machines?
      Also, any thoughts on a machine with enclosed cab, HVAC, and modern electronics
      Pop Bob 
    • By BWF
      I have a 2011 or so Landmaster LM200.  I cannot get it to start.  I turn the key and nothing happens.  The brake switch seems to be working, the ignition switch works.  The Coil is new the Voltage Regulator is new and the starter relay is new.
       
      I can connect the terminals on the starter relay and it starts right up and runs fine.  I just can't get it to start by turning the key.
       
      I am having a bit of trouble bleeding the brakes, not much fluid comes out at the calipers when I am pumping the brakes, though that an air bubble near the brake switch might make it not sense that the brake pedal is depressed.
       
      I am at a loss, please help!
       
      Brad
×
×
  • Create New...