Quantcast
Jump to content

Seriously considering buying 2022 Axis 700 from Lowes… any regrets from current owners?


Go to solution Solved by Robert Scott,

Recommended Posts

  • 2 months later...
On 2/25/2022 at 6:54 AM, TapBoss said:

Just looked at the Lowes add for that, pretty much looks like an  MSU 500/700 that Hisun made for Massimo back then.  Take a good look at the badging on parts to see who it's actually made by, my guess is it's still Hisun.

I purchased one from Lowes. Axis 700.

it is made by HiSun in Texas and are rebadged with several names. Got  it in Feb  of 22’ and used mainly for Hunting property maintenance and  cruising around. Have had only one issue so far. Voltage regulator went out and local authorized dealer repaired it under warranty. 
For what comes with it (winch, windshield, etc.) the price is easy on your wallet. Will it last, is yet to be seen.  5 k more and a Polaris or Honda  could be yours, but that’s half the price of another HiSun  unit. 
Be Safe …

 

 

Link to comment
Share on other sites

On 2/26/2022 at 11:30 PM, scott ryan said:

I picked up the Axis 750 quad cab a little under a year ago. Put about 40 hours on it.  Runs way better after break in adjustment and fluid changes, 20 hrs. Only issue was a $20 broken air/oil separator.  Helps to be handy with maintenance cause service centers are scarce around me.  If you purchase, inspect everything before you drive off. Others have had bad experiences in my area. I'm completely satisfied with mine. It will go anywhere.

I'm due for my break-in service with just over 50 miles on my Axis 500.  Which fluid changes did you perform (in addition to the engine oil and filter change)?  Local UTV shop is telling me that all of the fluid needs to be changed, from the final drive fluid to the differential fluid.  The owner's manual just talks about doing the oil change and filter change after the initial break-in period.

Link to comment
Share on other sites

39 minutes ago, Shannon Watts said:

For the Axis 500 it is, it says so in the owner's manual.  After the first 50 hours, it's then every 500 hours between oil changes and I plan to use full synthetic.

 

4 minutes ago, Joe Breaux said:

you wrote 50 MILES ....

 

not 50 hours ... BIG difference 

My bad, it's 50 miles or 10 hours, whichever comes first.  

Screenshot 2022-06-28 202318.jpg

  • Thanks 1
Link to comment
Share on other sites

So to Jones’s point the 10HR /or 50 MILE interval is what should happen. So says my 500/700 Axis Manual
FYI.  I had a charging problem. I did a voltage test with a Voltage Meter while running and it sat at 12.5. Not good. 
Please make sure you register your unit on the HiSun site. I had to call because my Lowes did not do all that the registration  section on the HiSun site said they should have. 
I took it to the vendor that is Authorized to work on the unit and they verified the battery was good .  After a weeks stay they called and said that the Voltage Regulator was bad and that it will be a few days.  I was at 16 hrs and as a good faith gester and convince  to me I asked if they would change the oil and filtered and lube the beast.   Figured warranty wouldn’t pay much and an oil change would put a few bucks toward the labor . 
Service told me that the manufacturer had NOT responded to the warranty claim and that I would be able to only pay for the OC and Lube and if Warranty didn’t cover my repairs that they would call and be asking for additional payment.   (To the tune of(225.00). 😳
The synthetic blend 10-W40  and filter change and lube was 96.67.     Without a kiss or a Veteran’s Discount.
Overall still glad I got the unit in FEB of 22 and use it around the house and for Hunting property maint. and eviction of a harvest.    
Check out You Tube Site    Caseymaples19xx   He has good content and shred his experience with a Axis 700

 

Link to comment
Share on other sites

2 minutes ago, Buss said:

So to Jones’s point the 10HR /or 50 MILE interval is what should happen. So says my 500/700 Axis Manual. 
FYI.  I had a charging problem. I did a voltage test with a Voltage Meter while running and it sat at 12.5. Not good. 
Please make sure you register your unit on the HiSun site. I had to call because my Lowes did not do all that the registration  section on the HiSun site said they should have. 
I took it to the vendor that is Authorized to work on the unit and they verified the battery was good .  After a weeks stay they called and said that the Voltage Regulator was bad and that it will be a few days.  I was at 16 hrs and as a good faith gester and convenience   to me I asked if they would change the oil and filter and lube the beast.   Figured warranty wouldn’t pay much and an oil change would put a few bucks toward the labor . 
Service told me that the manufacturer had NOT responded to the warranty claim and that I would be able to only pay for the OC and Lube and if Warranty didn’t cover my repairs that they would call and be asking for additional payment.   (To the tune of(225.00). 😳
The synthetic blend 10-W40  and filter change and lube was 96.67.     Without a kiss or a Veteran’s Discount.
Overall, still glad I got the unit in FEB of 22 and use it around the house and for Hunting property maint. and evacuation of a harvest.    
Check out You Tube Site  Caseymaples19xx   He has good content and his experience with a Axis 700

 

 

Link to comment
Share on other sites

16 hours ago, Shannon Watts said:

I'm due for my break-in service with just over 50 miles on my Axis 500.  Which fluid changes did you perform (in addition to the engine oil and filter change)?  Local UTV shop is telling me that all of the fluid needs to be changed, from the final drive fluid to the differential fluid.  The owner's manual just talks about doing the oil change and filter change after the initial break-in period.

I did the final drive and diff fluid as well. Neither were difficult. Royal Purple 75w90.

Link to comment
Share on other sites

7 hours ago, scott ryan said:

I did the final drive and diff fluid as well. Neither were difficult. Royal Purple 75w90.

Looks like both take less than 1/3 of a quart.  Did you just buy 1 qt jug for both the final drive and differential or did you end up having to buy 2 x 1qt jugs after draining both fluids?

Link to comment
Share on other sites

3 hours ago, Shannon Watts said:

Looks like both take less than 1/3 of a quart.  Did you just buy 1 qt jug for both the final drive and differential or did you end up having to buy 2 x 1qt jugs after draining both fluids?

I buy 2 of everything, just need one tho. I go by the old philosophy of 1 is none and 2 is 1.  Never know when the supply chain will crash or prices will spike. Good luck!

Link to comment
Share on other sites

  • 3 weeks later...

Glad I found this thread. I'm considering the Axis 700, too. I've been rebuilding this 2009 for over a year and there are so many new parts in it it's practically new. And practically all Yamaha parts. :) But I might just sell it and spring for a new Axis 700. BUT Lowe's seems to be always out of stock. Does anyone know if there's a long backorder wait time on these?

 

20220615_145619.jpg

Link to comment
Share on other sites

14 hours ago, RickinMT said:

Glad I found this thread. I'm considering the Axis 700, too. I've been rebuilding this 2009 for over a year and there are so many new parts in it it's practically new. And practically all Yamaha parts. :) But I might just sell it and spring for a new Axis 700. BUT Lowe's seems to be always out of stock. Does anyone know if there's a long backorder wait time on these?

 

20220615_145619.jpg

They are a decent machine after you swap out the junk parts for OEM Yamaha pieces . Problem is, I dont want to go thru that nightmare again.. My next will be Honda or Kawasaki. The guys I ride with never have issues. they are bulletproof 

  • Like 1
Link to comment
Share on other sites

  • 1 year later...
Posted (edited)

Hey all.  Just thought I'd weigh in with our pretty much horrible experience with a new Axis 700 purchased last May 2023 from Lowes in Winchester, VA.  Brought it home, put about 10 hours on it and it won't hold a charge.  LOOOOONG story, the mobile tech has been out 4 times, replaced the battery, voltage regulator twice.  I told him in February I thought (after doing a bit of research) that it was the stator, since if kept on the trickle charger it reads 100% charged, run it 15 minutes and it's down to 40%-that means the stator is not charging the battery while it's running.  Anyway, last time he came out the part that he was supposed to change out was shipped in too small a package and was bent and unusable.  I have about a 10 page email chain to 6 different folks at Hisun in TX begging for some resolution.  They ignore my calls, emails, voice mails, etc.  Needless to say, we are really frustrated with the vehicle, the company, the mechanic; pretty much everything to do with this worthless POS.    It is truly ridiculous to spend $10K on something that is now sitting in our garage torn apart waiting for the worthless mechanic once again.

UPDATE:  Now the tech is scheduled today for his, yes 6th visit.  This time, in addition to replacing the stator, it now has a cracked water pump that needs to be replaced.  This on a vehicle that still has 10 use hours on it.  (It has an additional 5 from running during repair visits).  The support from Lowes and Hisun has been nothing short of abysmal.  

Edited by GigiH
update
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By great8redsfan
      Okay folks. I have a low power issue. Been like this for a few years. Place I work at bought 3 and all have lost most of the pulling power.  They gave them away after local shop worked on one for 3 months and it had great power for about 1 month and then crap. They replaced throttle body, fuel injector, spark plug and IAC motor. Seat belt switches have wires cut and left open so no seat belt warning light anymore. It revs to 6k rpm in neutral but when put in gear and take off in low it just doesn’t seem to want to go anymore. Running 93 octane fuel with Stabil.  Any ideas greatly appreciated. I dont have a scan tool but no codes on dash. If held to floor it pops a little and runs almost 5K rpm but if I let off pedal about an inch it smoothed out and revs up to 6k rpm. 
    • By todd93
      Hi, all! I. I'm new to the board, hoping someone could help me out! I have a 2020 Hisun Sector 550C that I bought new in 2021. Today, I took some stuff next door to my parents. When I went to leave, I turned on the key, heard the solenoid click, but no lights, no guage activity, no fuel pump, and no starter. 
       
      The battery is good, I checked all the fuses, they are good. Not sure if the relays are good, or even what to look for there. Is it possible that it's maybe a wire? 
      I'm really stumped on this one! Any help would be deeply appreciated! Attached is a pic of the fuse box layout. 
       
      Thanks! 
      Todd 
    • By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • By Mark M
      Hello, Hope someone can help driver side cv axle broke anyone know of aftermarket ones you can get, I have 40 Hours on the machine and don't want to pay 450.00 for a new one from cub cadet but I can't find anything after market 
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
×
×
  • Create New...