-
Posts
201 -
Joined
-
Last visited
-
Days Won
20
Content Type
Profiles
Events
Forums
Gallery
Downloads
Community Map
Everything posted by TapBoss
-
Umm, never new Gates to have a plant in China. They did move some operations down to Mexico years ago though so maybe that's possible.
-
Not much info to go on, but maybe not the identical part used in replacement?
-
Transmission's grinds on our Buck 450 when you shift it.
TapBoss replied to Farm Boy's topic in Massimo UTV SxS Forum
I couldn't find this info in the manual for my 550 either. Had to call CS to get the info over the phone.- 48 replies
-
- buck 450
- transmission
-
(and 1 more)
Tagged with:
-
Brand new? Take it right back to the store.
-
Most likely needs adjustment to the shifter or check/change fluid.
- 2 replies
-
- 1
-
- rk 750
- rural king
-
(and 1 more)
Tagged with:
-
I use Lucas products , 80-90 HD Gear Oil for the diff and 10w40 Semi-Synthetic. For the winch, some brands will cross over but not sure which. Check your cooling system, seems to be the biggest problem with that model/year range (fan and coolant level). Other than that, check wiring connections and water proof as much as you can, corrosion causes a lot of issues as well.
-
Different machine, but I kept it under 20mph until the first oil change. For reference, speed was about 50% of top end.
-
Is this new or used? If new, probably shouldn't be at full throttle until the thru break-in period.
-
Should take 2 quarts. Did you have the dipstick out or filter off when draining? I would take out the drain plug again and make sure nothing is blocking it from draining (wear gloves for slivers.) There was a thread on here recently where parts had broke loose. If clean you can just refill with this oil.
-
How much oil did you end up getting out of it? Or, how much oil did it take to fill back up?
-
7yrs old and 12 miles on it? Sounds like there's something wrong with it and it's been parked for a loooong time. Even if there wasn't, sitting for any length of time is not good. There's quite a history of issues with those models on here. A good price would probably be one low enough to replace the engine.
-
Bought my 550 just about a year ago, no issues to date. Most of the problems on here are from the earlier models that were Hisun machines, not from those that bought more recently when they switched to Linhai.
-
Bill, I installed another usb/battery meter in the open spot in the bottom left of your pic this weekend. Took the front tire off for more room and used a flexible grab tool I had on the bench to pull wiring up to the battery.
- 11 replies
-
- massimo buck 450
- 2022
-
(and 1 more)
Tagged with:
-
UTV Attachments, Implements reviews
TapBoss replied to Steve Vanvelzen's topic in General Discussion - Anything
Rent a skid steer with a mulcher attachment. Looks like an oversized stump grinder. We used them to clear out under power lines, which wasn't done that often so trees would get to 6-8" in diameter and that thing would eat them up. When you're done clearing just run it over the cleared ground and it's tilled and ready to plant. -
Add a battery under the seat of Mule 2500 or 2510
TapBoss replied to Mikey's topic in Kawasaki UTV SxS Forum
Could you just attach one of these under the seat? https://www.amazon.com/Camco-55394-Standard-Battery-Hold-Down/dp/B002XL2I0Y/ref=sr_1_3?crid=1WWRX4WUMA7BJ&keywords=battery+tray+holder&qid=1645532073&sprefix=battery+tray%2Caps%2C165&sr=8-3 -
From your description, I'd say a UTV is what you'd want. Much more comfortable than an ATV for extended use like plowing. Plus you could have a windshield and enclosure. No worries about being top-heavy, nothing above shoulder level but roll cage and a plastic roof. Plenty of options and prices ranges out there, if you can find them in stock.
-
There is a parts manual under the downloads tab for the 410.
-
Damn, guess I should have held on to mine longer. Sold it for $2700, although it didn't have the rear seat.
-
For something like that you might even be able to get by with an electric golf cart with a rear seat that folds down into a flatbed.
-
Coleman utv 550 outfitter transmission fill and level check
TapBoss replied to gerald's topic in Coleman UTV SxS Forum
Should be about half way up from where your drain plug is located. -
Could be because your machine is made with Hisun parts. Those of us commenting here at least have newer ones made from Linhai parts. (Who knows if those parts still come from the same factory though.)