Quantcast
Jump to content


Differential Upgrade Kits are available

Guest Lenny

By Guest Lenny
in Joyner UTV SxS Forum

 Share

Recommended Posts

Guest Lenny

Guest Lenny

Posted
Posted

I finally have the Differential Upgrade Kits done and can start to ship next week. I made up 20 kits and used 2 for myself leaving 18 kits left. The kits can be purchased from me for $90 per kit. You will need 2 kits, one for the rear and one for the front. There is a slight difference so be sure to specify which one you want. I will pay for shipping and insurance, priority mail. It should get to you in aprox 3 days. I don't know if I will be making up more kits. It I will depend on how these go. However, if I do, I will be charging $135 per kit after the initial 18. This got a lot more involved and required a lot of shims than I initially thought. Some shims I have to machine after getting them. You will get an extra snap ring to be used where Joyner chose to omit one. Also you will receive 12 special machined bolts. These will be metric grade 12.9, much stronger then the stock bolts. Each bolt includes a locknut for it's rear side. Full instructions with lots of pictures and a shim placement drawing is in the kit. Even though you will have several shims left over, I felt I needed to provide a complete range of thickness capability for each location.

If you would like a kit(s), PM me and I will give you payment instructions. Payments will be made through PayPal.

Thanks for everyone's patience.

Lenny

2328791330104282158OYauDO_th.jpg

Guest Lenny

Guest Lenny

Posted
Posted
Payment sent.

Thanks, it will go out tomorrow. Thats the last kits except for two I'm holding for Paiute3 and one for Kinarfi. If others ore interested in kits, let me know. If I get enough wanting them, I will make up another batch. They will be $135.00 per kit for the new kits.

Lenny

  • 3 weeks later...
ksimpsy Enthusiast

ksimpsy

Posted
Posted

Just finished the front diff and everything worked perfect. the only difference I found is that I had no groove for the new snap ring. not the biggest deal I just didn't put it in.

thanks again Lenny

Kevin

Guest Lenny

Guest Lenny

Posted
Posted
Just finished the front diff and everything worked perfect. the only difference I found is that I had no groove for the new snap ring. not the biggest deal I just didn't put it in.

thanks again Lenny

Kevin

They don't all have the groove. I beleive that there are 3 different versions of the diffs. For the most part they are idenical but there are some suttle changes. Glad it worked good for you. Did your big ring gear bolts show signs beginning to shear? So far everyone I have seen, does. Some of the diffs are unbeleiveably loose in stock form. And, thanks for the good input on my supercharger project.

Lenny

ksimpsy Enthusiast

ksimpsy

Posted
Posted

yeah just finished the rear diff and all the bolts were loose 4 were half sheared off and one was completely broke the dummy that safety wired the thing did it backwards :angry: . its a good thing I didn't go on that last ride. one thing on the rear diff is that I took out all the shims between the cone and bearing and when reassembled it still needs to come down to fit the pinion gear better. so what you said about machiening the shoulder down is a possibility. mine wasn't that bad so i just set it as best i could.

Kevin

Guest Lenny

Guest Lenny

Posted
Posted
yeah just finished the rear diff and all the bolts were loose 4 were half sheared off and one was completely broke the dummy that safety wired the thing did it backwards :angry: . its a good thing I didn't go on that last ride. one thing on the rear diff is that I took out all the shims between the cone and bearing and when reassembled it still needs to come down to fit the pinion gear better. so what you said about machiening the shoulder down is a possibility. mine wasn't that bad so i just set it as best i could.

Kevin

I'm just amazed that everybodys diffs aren't falling apart left an right.

Lenny

  • 2 months later...
  • 2 weeks later...
Guest Lenny

Guest Lenny

Posted
Posted
Got any more of these kits. My front end was grinding a little so I might as well upgrade if I am going to open it up.

Sorry, but I don't. I do understand hat Joyner has decided to warranty any differentials that go bad. You may want to consult joyner or your dealer.

Lenny

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • BWF
      Landmaster LM200 Will Not Start
      By BWF
      I have a 2011 or so Landmaster LM200.  I cannot get it to start.  I turn the key and nothing happens.  The brake switch seems to be working, the ignition switch works.  The Coil is new the Voltage Regulator is new and the starter relay is new.
       
      I can connect the terminals on the starter relay and it starts right up and runs fine.  I just can't get it to start by turning the key.
       
      I am having a bit of trouble bleeding the brakes, not much fluid comes out at the calipers when I am pumping the brakes, though that an air bubble near the brake switch might make it not sense that the brake pedal is depressed.
       
      I am at a loss, please help!
       
      Brad
    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • Sidewinder
      Polaris RZR 800 Rear Differential Pinion Nut Issue
      By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • RBonds007
      2019 Cub Cadet Challenger 400, trailer to transport the Challenger, and new, never used winch for sale
      By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...