Quantcast
Jump to content


Parts

ricksrb

By ricksrb
in Joyner UTV SxS Forum

 Share

Recommended Posts

ricksrb Mentor

ricksrb

Posted
  • Author
Posted

Ad shows Casey as the seller. Casey was the person / manager in charge of the shop at TeamJoyner.

rocmoc n AZ/Mexico

Yea, I spoke to him a few times.Gonna give him a call later.Wish i saw his add last night,I may have made a trip over there and picked up some parts today.

Az Bound Contributor

Az Bound

Posted
Posted

Yea, I spoke to him a few times.Gonna give him a call later.Wish i saw his add last night,I may have made a trip over there and picked up some parts today.

Is he in Arizona?

Az bound

Chalkstk Contributor

Chalkstk

Posted
Posted

Yea, I spoke to him a few times.Gonna give him a call later.Wish i saw his add last night,I may have made a trip over there and picked up some parts today.

Yes, Casey is the one I was troubleshooting with on my high rev problem before they closed. Do you have his phone number?

THX,

Chalkstk

Chalkstk Contributor

Chalkstk

Posted
Posted

We are near Tucson, AZ/ The Mexico is south of the border because we go down ofter. Leaving today for a week. You will be 4 hours from us.

rocmoc n AZ/Mexico

We retired in 04 as Fulltime RV'ers. We manage a small RV park in Quartzsite from Sept to May, then go to Deming for summer months. Problem is now that I have the R-2, I can only tow it either behind the Class A or behind the GMC PU. So I can't drive both vehicles, as my wife hates to drive period............Bummer!

Have a safe and great time in Mex and watch out for those "druggies" :) I have had no meaningful response to my high rev situation. Can't afford to just buy a bunch of parts and hope I catch the problem but never know which part did the fix, that is if I could get all the parts.

Went thru the pdf manual last nite and was disappointed as they give allot of schematics, but no pics of the part they explain. I have no idea what one sensor, except the MAS, looks like or where it is on the engine???

Could I have a possible intake gasket leak? Would that cause high rev? If so, then why does it finally idle after a bunch of strats/stops? This "intermittence" is driving me nuts, instead of me driving my rig :(

Chalkstk

Az Bound Contributor

Az Bound

Posted
Posted

Chalkstk:

I also had a similar problem to yours. Turned out to be a small rock that had been thrown up into the accelator pedal craddle and the pedal itself. Couldn't see it without pulling the hood fiberglass. I installed flat metal over the entire pedal craddle and haven't had a problem since. Hopes this solves your problem.

Happy Trails

Az Bound

Kinarfi Veteran

Kinarfi

Posted
Posted

On some intermittent problem, that I have had in the electrical industry and other places, I have often resorted to unplug everything and plug it back in and it surprises me how often this grenade approach works, covers more area than a shot gun approach :lol: . My theory is that one pin some where is making and breaking contact, whether dirty, corroded, not seated properly, etc. gets a better contact with this procedure, And I assure you, it has worked for me more than just a few times. I would start with the plugs at the computer and eyeball all the pins in the plugs to see if they all protrude the same amount.

Hang in there and if you don't get it fixed, remind us periodically and maybe someone will have a good tip for you.

Kinarfi Veteran

Kinarfi

Posted
Posted

We retired in 04 as Fulltime RV'ers. We manage a small RV park in Quartzsite from Sept to May, then go to Deming for summer months. Problem is now that I have the R-2, I can only tow it either behind the Class A or behind the GMC PU. So I can't drive both vehicles, as my wife hates to drive period............Bummer!

Hire a kid to drive the GMC, You get both rigs where you want and the kid has a hoot doing it, he would probably pay you for letting him to do. :)

Chalkstk Contributor

Chalkstk

Posted
Posted

On some intermittent problem, that I have had in the electrical industry and other places, I have often resorted to unplug everything and plug it back in and it surprises me how often this grenade approach works, covers more area than a shot gun approach :lol: . My theory is that one pin some where is making and breaking contact, whether dirty, corroded, not seated properly, etc. gets a better contact with this procedure, And I assure you, it has worked for me more than just a few times. I would start with the plugs at the computer and eyeball all the pins in the plugs to see if they all protrude the same amount.

Hang in there and if you don't get it fixed, remind us periodically and maybe someone will have a good tip for you.

Thx Kin,

I'll try the plug in and out thing. Just got some di-electric grease. But my sledge hammer is at the ready :rolleyes:

Frankie

Chalkstk Contributor

Chalkstk

Posted
Posted

Chalkstk:

I also had a similar problem to yours. Turned out to be a small rock that had been thrown up into the accelator pedal craddle and the pedal itself. Couldn't see it without pulling the hood fiberglass. I installed flat metal over the entire pedal craddle and haven't had a problem since. Hopes this solves your problem.

Happy Trails

Az Bound

Hi AZ,

The throttle body cam is at rest. Idle screw is completely backed off. Think the plug and unplug tip is next to try. Got di-electric grease and contact cleaner ready. Thx for the concern. Evrybody here has been a great encouragment.

Frankie

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • Robert Hamilton
      Ruesch parts
      By Robert Hamilton
      i am looking for front brake calipers and brakes for my 2008 ruesch xr side by side
      Can anybody help me
      Thanks bob
    • 180gtr
      Parting out Joyner Sand Viper 1100
      By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















    • RBonds007
      2019 Cub Cadet Challenger 400 online parts
      By RBonds007
      Looking for an online parts store.  Just need basic maintenance parts tune ups and such.  Any suggestions?
    • Jody Deville
      Joyner 800 Renegade rear axles
      By Jody Deville
      I’m looking to best place to buy replacement axles for the rear in my buggy. Both axles are bad. Where is the best place to find them?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...