Quantcast
Jump to content


Cams update?

2scoops

By 2scoops
in Joyner UTV SxS Forum

 Share

Recommended Posts

  • Replies 37
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

  • 2 weeks later...
plumber Proficient

plumber

Posted
Posted

Well yes but if I had to do it all over again I would take off the head and send it to rick it made it so much easier and you know it is right it is worth every penny that rick charged.When you take it all apart take some white out and mark all the spot so you have everything aligned up even mark the timing belt and gear so you get it back in the same place I really like the cams

How hard was the installcould a back yard dummy with some tools do it. Robert.

.

Guest Lenny

Guest Lenny

Posted
Posted

Well yes but if I had to do it all over again I would take off the head and send it to rick it made it so much easier and you know it is right it is worth every penny that rick charged.When you take it all apart take some white out and mark all the spot so you have everything aligned up even mark the timing belt and gear so you get it back in the same place I really like the cams

.

Keep in mind that when doing the cams, you will get a modified cam belt pulley which advances the cam timing. This will use different and new timing marks when installing the belt. The original timing marks will still be on the pully, just not used.

Lenny

  • 1 month later...
lowgear Enthusiast

lowgear

Posted
Posted

older yamaha shims work fine i use them in mine and the come in a lot of sizes. we used too change cam timing in our race bikes by maching the bolt holes oblong. i don't know if that can be done on the 1100 but it would be worth looking into. we set up a degrea wheel on the crank and a dial indicater on the cam bucket. you will have to know the lobe centers on the cams to do this. intake and exhaust will probably be different. with some playing you can realy get the most from them.

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • OBL
      can-am 2017 commander 1000xtp cannot get BUD'2 program to connect
      By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • AaronD1982
      Hoping someone out there somewhere can help.....2019 Massimo Buck 400S
      By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • Fmaxiron
      Can-Am spare parts?
      By Fmaxiron
      Hit a rock last weekend and trashed my front A-arm and axle on my Outlander. I’ve been looking around for reliable sources for replacement components. A lot of listings online look a bit hit or miss, so I’m trying to figure out what’s actually worth trusting.
      Has anyone here had good luck with dealers or sites where you can buy genuine Can-Am spare parts online without worrying about quality issues or fake OEM stuff? I’d rather pay a bit more and get the right fit than deal with problems later.
      Any recommendations appreciated.
    • HighSon
      Silent Rider Silencer Update
      By HighSon
      So for those of you who have dabbled in muffling your insanely loud Hisun, I just wanted to give an update on the Silent Rider Silencer project I reported on just short of 3 years ago. The silencer has failed from rust rot. So in the end, not a good investment. If I do a different one, pretty sure it will be stainless this time. 
      If others have tried other add-on mufflers or fixes beyond what’s already been reported, please post your experience.
    • HighSon
      Some recent Hisun Sector 750 mods
      By HighSon
      Haven't posted in a while since solving the excessive cabin noise issue, so I thought I would share a few upgrades to my Sector... Realize that this is driven daily on the street, so some of the mods are to make it more streetworthy.

      Locking gas door.

      Rear view mirror.

      Modified windshield for better airflow in cabin.

      Lowered and modified headrest bar for improved rear view.  Tailgate protector.

      Folding armrests.

      Overhead utility rack.  Keeps the interior cooler and dryer, too!

      Folding rear seats.

      Dust cover and seat protector.
      If anyone wants links to the rear view mirror, seats, or arrests, let me know and I will post.  But know that everything requires some level of fabrication.  The utility rack was all custom built.  Cheers!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...