Quantcast
Jump to content

Rear end is trashed


3wheelermaniac3

Recommended Posts

Well tore apart the rear end and to my surprise is a lot of metal in the bottom. Further into it I've found that my ring and pinion are trash. I noticed that the ring bolts have been drilled and safety wire installed but they are the factory bolts. I need a parts list for upgrading it and am looking for a ring and pinion also. Feel free to ask me any questions. And all input is highly appreciated!

Link to comment
Share on other sites

I think I may have a ring and pinion. I replaced my original trooper ring and pinion with the commando ring and pinion as I wanted more low end power. I had put 30 inch tires on and so I wanted more low end. I will look and if I can locate i will PM you. Might take a day or two but will try and locate.

Link to comment
Share on other sites

  • 5 weeks later...

Hey guys!

Well back to the rear end on my trooper.

I didn't pull the rear apart yet but I have a knocking sound in the rear end just like last time! Going to say it's one of the center pins.

So first question is does anyone else had this issue? And 2 I will be looking for pinion shafts again. So please let me know if anyone has one.

Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By hdtran
      It's not immediately obvious to me how to wire a remote control (wired or wireless) on the Sector E1.
      Has anyone here done this? Do you have pictures on how to get to the wiring?
      Thanks!
    • By lonerider98
      At the end of last year my Coleman UT 500 will not go into reverse. I can hold it over toward the reverse to move it nut it won't lock into reverse. Anyone have this problem? Winter is just about over and going to have to get this resolved. Thank You!
    • By NicholasNWM09
      Hello Everyone,
      COOL NEW Product Alert! 
      A company called NEW Wire Marine or NEW Wire has Badass custom panels for UTV, Buggy/Hunting trucks. From Fully wired switch panels with laser etched rockers with backlights in 5 different colors, to just parts like voltmeters, phone, USB and 12 v chargers. Rockers can be printed, or custom laser etched rockers and they even have sleek labeled pushbuttons. They are a first-class company with a great knowledgeable staff and outstanding customer service. Switches are based on 12v or 24v circuits and they also have marine grade wire and connectors, which is perfect for waterproofing your system!
      Go check them out!
      Check out the websites : https://newwiremarine.com/ and https://rockerswitchpros.com
       
       
       
       
    • By NicholasNWM09
      Hello Everyone, COOL NEW Product Alert! A company called NEW Wire Marine or NEW Wire has Badass custom panels for UTV, Buggy/Hunting trucks. From Fully wired switch panels with laser etched rockers with backlights in 5 different colors, to just parts like voltmeters, phone, USB and 12 v chargers. Rockers can be printed, or custom laser etched rockers and they even have sleek labeled pushbuttons. They are a first-class company with a great knowledgeable staff and outstanding customer service. Switches are based on 12v or 24v circuits and they also have marine grade wire and connectors, which is perfect for waterproofing your system! Go check them out!!!Honda - xxxx - UTV Pioneer - xx'.pdf
    • By lowgear52
      Does anyone out there have a rear differential for a trooper for sale?
×
×
  • Create New...