Quantcast
Jump to content


Hisun Utv 500 help

Jcherbert1

By Jcherbert1
in Hisun UTV SxS Forum

 Share

Recommended Posts

Jcherbert1 Rookie

Jcherbert1

Posted
Posted

I'm wondering if someone can help me with an issue that has brought me to my wits end with my 2008 Hisun UTV 500.

This thing was running fine and it sputtered then died. I pulled the spark plug and there was no spark so I replaced the ignition coil, no luck. Then replaced the stator-magneto-pick up coil, still nothing. I then replaced the cdi with still no luck. I removed the wiring harness and went through it to look for any obvious issues and found only one, a capacitor at the rectifier connection which I replace as well with no luck. The spark plug was replaced today and same shit, nothing. The plug I have connected to an alligator clip and grounded to the engine. I know it has to be something simple but my simple mind cannot seem to figure it out. Any suggestions would help. 

  • Like 1
  • 4 weeks later...
  • 3 months later...
Dan B Community Regular

Dan B

Posted
Posted

You've replace all the components that can cause loss of spark.  Is the gap between the pickup coil and the pulse rotor close?  Gap shouldn't be much more than the thickness of a business card.  I don't know if it is adjustable on your machine.  Check your ground connections.  Do you have battery voltages where they should be with the ignition switch on?  You may have to find a Hisun dealer.  I can only find general diagrams for CDI systems, nothing specific to your machine.

  • 2 years later...
  • 1 year later...
Ecker patrick Newbie

Ecker patrick

Posted
Posted

Hi, I have the same problem, and the electric furl pump can not run. At end, I make a new ground negativ directly at the electric pump, and all is OK. I don’t where is the problem before, I chek all parts, and at end only the negativ don’t be correct at the electric fuel pump. I write from panama, and here many sellers and nobody  to help you for Hisun.

the problem, it’s difficult to found a repair service manual for Hisun 500 ES year 2018 

It’s very easy

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • hetovi
      Best UTV Windshield for Extreme Conditions
      By hetovi
      Hey everyone,
      I’m in the market for a UTV windshield that can withstand extreme conditions, including high winds, dust, and off-road impacts.
      I’ve seen a lot of options out there, but I’m unsure which one will provide the best protection and durability.
      Does anyone have experience with windshields that excel in these environments? Are there specific brands or materials you recommend?
      I’m particularly interested in options that offer both durability and clarity.
      Any tips or personal experiences would be greatly appreciated!
    • Rschrem
      2010 700 Hisun starter issue
      By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 
    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • Pick a name
      Shifting issue
      By Pick a name
      The Axis 500 will not shift into low or reverse.  I have high when it should be in low and all the other places it is reverse.  The gears in the shift cover are fine and I shifted it when the cover was off and yet no change (so it can't be the shifting mechanism gears).  I t has been difficult to get it into low for awhile.  But now it is either high or reverse, no neutral either.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...