Quantcast
Jump to content

Rear Diff


Recommended Posts

I have a 2006 2x4 Commando 650.

This past weekend I noticed a clunking type noise coming from the rear diff when turning sharp and more so when backing up in a turn. There does seem to be some side play. It is full of fluid. What should I look for before hunting season gets me stranded.

Link to comment
Share on other sites

Are you driving around with your locker on all the time? This is especially tough in your machine if it's on pavement. Does it clunk when the locker is disengaged? How many miles on you machine? Can you tell how play? 1/8 th of a turn? Some play is normal. 

  • Like 1
Link to comment
Share on other sites

Correct, Commando always locked. I do drive on pavement some from cabin to the BLM  land but take it very easy when turning. I will drain fluid and check the Diff fluid for metal. I completely forgot about the CV jt could be the culprit and a WHOLE lot cheaper if they are available for my machine.

Link to comment
Share on other sites

  • 3 weeks later...

2x4 Commando 2006, 650cc.  with maual dump bed.

Looks like my LR CV is dry. I've pulled these CV's out of the Class 1 cars we ran so should be about the same principal with these I think. If any one has a you tube vid on pulling CV out and rebuilding that would be awesome. There still feels like a 1/2" of play maybe in the dif gears. Is that to much. Are the rear CV's available?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By AlaskaTrail
      Hi All,
      New to UTVs and recently accuired a ut400 from our local Alaska Commercial Co. and had a questions regarding the transmission fluid. I have had a squeeling noise, sounds like a teapot, that recently started after being driven for a few minutes. The manual says to change the fluid at 500 miles, so I was thinking maybe its just time for this to be changed. Other then that I cannot find any information regarding the type used. While reading through these forums, I seen someone put that the transmission is lubricated with the engine oil. Is this true? If not what should I be using and where can I find the information to change it out? Any input on this would be greatly appretiated!
      Thanks in advance
    • By nods
      Less than 40 miles can barely start. Dealer is working with Hisun on a number of other issues on this UTV. Can not get clear info on the meaning of these E codes this is getting. Anybody have some clear info for me?
    • By packersfan
      I have a hisun 500 got from a auction and when turning a corner left or right it's a two hand job then when you left go snaps back.any help on what to look at would be appreciated.
      Also blows blue smoke until she gets warm then it's ok 
    • By Robert B
      Going down a 20 deg hill engine is holding UTV back. Then something releases like going into Neutral and makes a loud clacking noise. Have to use brake to slow UTV down. Then once level it shifts back into gear. Have done shift extension does not pop out of gear.
    • By Jamesjoh
      I've installed the Kemimoto side by side mirrors in my UTV to replace one that would not stay in place.This one give great views and tightens down nicely, but you have to take them down evenly or it gets bound up. Just an all around great mirror.
×
×
  • Create New...