You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
After sitting this winter in a garage, I noticed coolant under the side by side when I went to get it out. Does anyone know what would cause the coolant to leak out while in storage? Any assistance would be greatly appreciated.
Thanks,
John
I just reassembled the engine to fix the shifting issue. I ran the unit for about 15 min and it started to overheat. I thought it was an air lock and let the unit cool down and opened the radiator cap and head burping and then looked under the machine to find coolant. I found where it is leaking from, see attached photo 1. I added coolant and it doesn't leak until the fan starts. When I put the engine back together I may have installed something incorrectly? Image#2 one shows a part that I was not sure where it goes, I ended assuming it was part number 23 in image #3. Is this correct? Could this part be the issue why I am getting leaking?
So my 2022 Tracker 800SX developed a coolant leak. Under pressure there was a pin hole size leak which was spewing coolant towards the firewall. Upon removing the tank I discovered it was bulging pretty severely such that it caused a small crack. Has anyone else experienced this? I suspect either a faulty tank or perhaps a faulty tank cap (rated at 15PSI).
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.