Quantcast
Jump to content


Gearing Change

mouser58

By mouser58
in Joyner UTV SxS Forum

 Share

Recommended Posts

mouser58 Explorer

mouser58

Posted
Posted

Any possible way to change gearing in these. If a guy was to go up to 30 or 31" tires, would be nice to change gears to get back to original gearing for the super low granny gear for crawling or just dodging trees out in my woods.

  • 3 weeks later...
Guest Lenny

Guest Lenny

Posted
Posted

Unless your rock crawling and want a super low granny, It's good the way it is with the 31" tires I have. I can even do a good job on the rockcrawl jeep trails as is. Not easy to change the diffs or trany for different gearing. I'm working on planitary gearing for the four hubs to get the low low type gearing but I have a long ways to go and not yet sure I can actually get it to fit and work the way I would like. Either way, it will be some time.

Lenny

Russ Explorer

Russ

Posted
Posted

We just put 30" ITP's on a trooper and put all of the bars on, (fender bars, rock rails, etc.). It did take some power but I like it so far. I found out yesterday that Joyner is trying to get a ring & pinion set that is lower and a set that is higher to offer for the trooper. I did'nt ask specificly about the renagade. Also there is a company making a fifth gear ass. that you slide in that will bump up top speed on a stock trooper. I am waiting on the info to find out just how much for sure. One person said 70 and one said 79.

ksimpsy Enthusiast

ksimpsy

Posted
Posted

I've been thinking about getting a machine shop to build me new gears but if Joyner is coming out with lower ones i might wait and get them. i want to go back to tires but i want Interco Super Swamper TSL Boggers http://www.intercotire.com/tires.php?id=13&g=1 i really want the 33 x 14 but may settle for the 31 x 12.5. the best way to go would be Lenny's planetary gears on all corners to reduce the torque on the rest of the drive train.

Russ Explorer

Russ

Posted
Posted

I will try to find out when they think they will have the sets available and let you know. I think the planitary system will be awesome, but the added weight would be my concern.

ksimpsy Enthusiast

ksimpsy

Posted
Posted
I will try to find out when they think they will have the sets available and let you know. I think the planitary system will be awesome, but the added weight would be my concern.

That would be awesome if you can find that info out.

Thanks

Kevin

  • 2 weeks later...
Russ Explorer

Russ

Posted
Posted

I talked to Casey at Joyner yesterday and he said that they havent started making them yet, but that it is in the making and that he would tell me when he got proto's in. I would think that it may be awhile yet but I think it is a good idea. If anyone else gets a price on cutting new ones, I would like to get some info on them, price, where at, etc.. As soon as I find out more I will post it.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Fmaxiron
      Honda Pioneer 1000-6 back windshield or screen.
      By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • KMP
      2015 Arctic Cat Wildcat Sport 700 XT (tips for maintenance / just purchase)
      By KMP
      We just bought our 1st side-by-side and wanted to get tips on maintenance items we should address immediately for our 2015 Arctic Cat Wildcat Sport 700 XT.  We are truly beginners and welcome any and all suggestions.  Thank you, we appreciate your help!
    • Stubbsmobile
      massimo buck 400 grinding noise in high gear, pops out of high gear
      By Stubbsmobile
      Hey yall,
      Helping a friend out. he purchased a 2020 massimo buck 400 utv. has about 100 hours on it. after starting the engine, shifter in low, it does fine. when shifted to high gear, most of the time it acts like its not in gear completely, and it pops out and grinds bad. when you can get it in high gear, it acts like something is binding and it wont hardley roll before it jumps out of gear and makes that grinding noise. almost like trying to dr4ive a standard transmission car and start off in 3rd or 4th gear.
      I have been on this site for several hours now, and totally understand the overall feeling about massimo utv. I can only imagine trying to find transmission parts when other members cant even find a fuel filter, lol.
      A new transmission is (part#47516) $1159.99 plus tax and freight.
      anyone have any other ideas or suggestions on what is causing the noise in high gear and not wanting to move?
      Thanks ,
      Chris
    • AlphaSerenity
      Hisun Axis 500 Problems - Hesitation, struggles to go up incline, and low speed regardless of gear range
      By AlphaSerenity
      Hello,
      Before I invest $10k+ into a brand new UTV for the farm, I want to get my feet wet with a fixer upper and learn the mechanical side of things. I acquired a 2022 Hisun Axis 500 (Lowes-specific model) from an auction for $500. It has only 200 hours and 120 miles on the engine. It looks like the previous owner used it for ranch work and didn't drive it on trails, deep water/mud, or anything too crazy.
      While it runs and moves, it has some problems. It struggles to accelerate up any incline in high and low range and sometimes stalls when I let off of the throttle or change gears. When I apply throttle in neutral, it sounds like it is struggling for fuel/air and pops. When I decelerate, there is a grinding sound coming from the clutch, which I've read to be related to the one way bearing and is semi-common. The last thing I've observed is sometimes the speedometer display sometimes will show a much higher value for a few seconds after barely touching the throttle. Based on the documentation, if a problem is detected from the sensors, the instrument panel display should have an error code rendered on the screen in place of the time, but this isn't happening. Here is a video showing some of these issues (engine is exposed with console removed):
      https://www.youtube.com/watch?v=FFAkO5TaGps
       
      Here is another video of the clutches in action:
       
      I've done some research, but information on this specific unit and sister units is limited. There does seem to be transmission and clutch issues reported. I still need to check into the head gaskets. I don't have the equipment to test compression right now, but I do plan on ordering what is needed soon. I do have an order in place for some cables to read the diagnostics from the computer. There is a shop two hours away from me that works on Hisun products, but I am hoping the problem can be identified and is something within my ability to handle. Below is what I've already investigated.  I am leaning towards the primary clutch needing replacement right now.
      After getting it home and unloaded, I did the following maintenance/checks to it prior to operating it further:
      Changed the engine/clutch oil (and filter) and gear oils using manufacture recommended viscosity Changed the air filter and checked for cracks in the air intake flow. Verified good suction. Cleaned the throttle body Changed the spark plug and verified the gap was within spec (0.6-0.7mm) Changed the coil and coil wire Changed the fuel lines, fuel injector, and verified the fuel pump was outputting the correct initial prime pressure for ignition and continuous pressure after ignition. Also completely emptied the fuel tank and made sure octane 91+ fuel is being used per manufacturer specs. Ran seafoam through system too. Cleaned the spark arrester and verified no cracks or gaps in the exhaust flow Changed out the O2 sensor Checked all wired connections to ensure they were secured and no breaks were visible Checked the belt for tightness and for any signs of wear and tear Verified 4WD and the differential lock function as expected - still hesitates and struggles uphill Verified the fan gears in the shifter are not corroded and working as expected ECU was reset after replacing sensors and fuel-related parts  
       
      Thanks!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...