plumber

How much did shipping cost is this bob qiao

Jose if I send you a long block how much does it cost for your long block

I bought the 4x4 manual conversion from joyner before they went out of business I have had no problem with it I have pic in my gallery

THANKS

What do you think and 07 chery 1100cc engine is worth it will need to be rebuilt I'm looking to used it for parts and would the ecu work on are trooper

Lenny, How did you hook up the three wires coming off the coil you have 1-yellow,orange and a purple how do you know which wire go were on the male plug

You can buy 8 rights for 10.00 ea

They are all right hand what you are showing are two rights and two lefts so you would have to buy four sets to get eight right hands these are what I put in mine it does give you some measurement http://www.summitracing.com/parts/HAL-MHMR16T/

This is the adapter that I used http://www.jegs.com/webapp/wcs/stores/servlet/ProductDisplayPopup?storeId=10001&catalogId=&productId=&itemId=990321&langId=&showValue=1 you will need to see with that k&n filter that the one inch nut might hit the motor mount I bought the 20x1.5 too then had to buy the other one

I used a wix oil filter they are a real good one the # is 51348 about 6.50 But the k&n filter is hp1002 about 10.00 and up

I had mine in two different places I'm still looking for a good place you can go to my gallery to see were I have had it if you find a good spot post pic

here you go Rocmoc http://atlanta.craig...2912801858.html

Come on Rick Plumber needs a new !!!!!!

Kinarfi remember my fuze box melted a long time ago and I had to redo it But now I'm rewiring the back half of the trooper I all ready did the front.Kinarfi I have a question joyner wired up the relays up 87 12v and 30 to the ecu I thought 30 was 12v and 87 goes to whatever you are wiring up 86 to switch and 85 ground does it matter if 87 is your 12v or can I change it when I rewire it up

That's what I ment ignition switch to relay

That was quick

Instead of puting a switch in can you just hook up to ignition power to the relay so the fuel pump and fan would come on when you started it

I have mine before the cat

I have a question everybody is fliping there intake up what about using the intake off of a 1100cc sand viper they are up would it work and also would a ecu off a 1100cc sand viper work on a trooper

http://www.summitracing.com/parts/HAL-MHMR16T/

when mine was making noise up front it was the rod ends

I have a couple of them myself

Easy now (LOL)

Looking for parts I need the pins that holds the spider gears in the front diff for the trooper. If anybody has some for sell send me a pm

Lenny I would take a front and rear