Quantcast
Jump to content


Are you part of another UTV Forum?

Alex

By Alex
in General Discussion - Anything

 Share

Recommended Posts

Kinarfi Veteran

Kinarfi

Posted
Posted

I started with Arizona Riding a long time ago and left because all it seemed to be was a Joyner bash place and lots of useless arguing which is part of the reason I delete useless arguments here and push hard to keep things friendly and pleasant. I also check JoynerForum.com occasionally.

brostar Proficient

brostar

Posted
Posted
I started with Arizona Riding a long time ago and left because all it seemed to be was a Joyner bash place and lots of useless arguing which is part of the reason I delete useless arguments here and push hard to keep things friendly and pleasant. I also check JoynerForum.com occasionally.

Kinarfi, it's strangely quite over on RA now most of us old Joyner members their post here or on Joyner Forum. The UTV section does not get hit for days on end. I think all the crap that went on was because they saw a threat because they recognise a good Side X Side when they see one. Now the Rhino has turned into a Killing machine, the Prowler 951cc has bigger problems than the Trooper had to deal with the and the RZR has had multiple issues, those bullies are now busy wrenching and not typing. Life's sweet, what goes around comes around. I think the only one to come out of all that was rocmoc, who always held his head high, didn't defend by putting the boot in(like me) because he recognised the fact that "it's all about getting out there and doing it, in whatever you drive".

So Admin, for me it's here and Joyner Forums with the occasional look at RA.

Cheers Mike.

Alex

Alex

Posted
  • Author
Posted

Thanks for replying everyone. Riding Arizona.com looks similar to Mudbog.net and they use a different forum software...called vbulletin, which we're using over at autoverve.com

So I was just curious what other forums are using and such.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • AaronD1982
      Massimo Buck 400S UTV Stator......?
      By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • AaronD1982
      Massimo 400S Buck UTV Starter solenoid replacement
      By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
    • Eman85
      Best place to find info on Hisun or Massimo UTV's
      By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • Jeff freeman
      Utv wont start and broken fuel injection wire
      By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...