Quantcast
Jump to content


Recommended Posts

Posted

The new STI V-Roll is 14" and is the HOT NEW Paddle for large displacement UTV's.....but 185.00 each is high....

I am currently waiting on a reply from Dave at Fullerton Sand Sports, I saw him at the Sand Show and he states that he has a 12" rim that fits on the Trooper....???? I will post more when I know more...

I would recommend a Set of Paddles for the Rear....Turn your front tires around....4x4 engaged....Rear Locked...Front Unlocked

Posted

185 doesn't sound too bad if it's quality tire. My highlifter outlaw 2 was about $190-210 each cost depending on width.

Buggiedude

Did you meant turn the stock far east around backwards on front? (such as swapping front right for left and left for right side)

Sent from my DROID RAZR using Tapatalk 2

Posted

185 doesn't sound too bad if it's quality tire. My highlifter outlaw 2 was about $190-210 each cost depending on width.

Buggiedude

Did you meant turn the stock far east around backwards on front? (such as swapping front right for left and left for right side)

Sent from my DROID RAZR using Tapatalk 2

Yes I do mean that....it works for the Rears as well....but Paddles make a huge difference due to the weight back there....But it also depends on much performance you are looking for....

Keep in mind, we have only tested this in a "will it move around the dunes?" aspect....lol

Turbo takes out all doubt though.....

Posted

The 12" wheels will fit on the early Troopers but not on the others. The early ones had smaller brake calipers. The bigger calipers hit but you can grind them back to make them work. As far as paddles go, I would go with a 30-31" x 12" wide. This will give good floation and not kill your power. To go good on the dunes, you really need the turbo. I have some 33 x 16 on 15" rims that will bolt right up I'll sell the pair on rims for $300 plus shipping, but a stock machine won't pull them. The rims are nice super light ones. I run 33 x 13 on 15s on mine. I used to run the big ones on the back and the 13" wide ones on the front. It did real good but I decided it was a bit too much tire and it would pull my rpms down on bigger climbs. I don't run rhe dunes much and figure the 13 will serve me fine.

Lenny

Posted

Lenny, you are correct in that the OLD Trooper had smaller discs....but I am being informed that there is an excisting 12" rim with enough offset to mount to the NEW Troopers....If this is the case...than a STOCK Trooper should do just fine.

Posted

The 12" wheels will fit on the early Troopers but not on the others. The early ones had smaller brake calipers. The bigger calipers hit but you can grind them back to make them work. As far as paddles go, I would go with a 30-31" x 12" wide. This will give good floation and not kill your power. To go good on the dunes, you really need the turbo. I have some 33 x 16 on 15" rims that will bolt right up I'll sell the pair on rims for $300 plus shipping, but a stock machine won't pull them. The rims are nice super light ones. I run 33 x 13 on 15s on mine. I used to run the big ones on the back and the 13" wide ones on the front. It did real good but I decided it was a bit too much tire and it would pull my rpms down on bigger climbs. I don't run rhe dunes much and figure the 12 will serve me fine.

Lenny

What brand are the tires? I am a little worried about going too aggressive and overloading the engine.

When you say 12" wheels fit "early" troopers, how early we talking? 09'?

Posted

The first paddle tires I had were 27" on 12" rims. Had 4 of them but it didn't really have enough floation but they didn't do bad. Much better then stock tires. Paddle tires are 'Sand Tires Unlimited'. Paddles are pretty much same depth as new, about 1". There are 18 of them. Tires hold air great. Haven't put air in them in about 2 years and they are still firm. I had no trouble pulling them with my supercharged engine. When my engine was stock I could barely get going.

Lenny

Posted

What brand are the tires? I am a little worried about going too aggressive and overloading the engine.

When you say 12" wheels fit "early" troopers, how early we talking? 09'?

I believe first batch of trooper early like rocmoc had.....08 i believe 150 of Trooper was called early ones

Sent from my DROID RAZR using Tapatalk 2

Noc, you are correct, that was one of the 08/09 mid year changes....8" discs OLD to 10" discs NEW/CURRENT...remember the first Troopers would NOT stop...lol

Posted

Noc, you are correct, that was one of the 08/09 mid year changes....8" discs OLD to 10" discs NEW/CURRENT...remember the first Troopers would NOT stop...lol

Mine is a 09 only thing i could check for is the brake rotors diameter being 8" or 10"? also there's no cv on end of one rear driveshaft if i remember correctly....

Is there any other more telltale signs to look for?

Sent from my DROID RAZR using Tapatalk 2

Posted

There were SOOO many changes that first couple of years that it is really hard to say.....but yes the Rear Drive shaft was changed from U-Joint to CV as well, the brakes were the BIG change because that is what made the 14's Standard equip.

Posted

The first paddle tires I had were 27" on 12" rims. Had 4 of them but it didn't really have enough floation but they didn't do bad. Much better then stock tires. Paddle tires are 'Sand Tires Unlimited'. Paddles are pretty much same depth as new, about 1". There are 18 of them. Tires hold air great. Haven't put air in them in about 2 years and they are still firm. I had no trouble pulling them with my supercharged engine. When my engine was stock I could barely get going.

Lenny

what were you running up front when you were running the 33x16 paddles in back?

Posted

The turbo would pull the tires but I don't know how the narrow steering tires would work up front. I would run in 4x4 but didn't need it except on the larger climbs. 4x4 added only a little bit extra.

Lenny

Posted

The new STI V-Roll is 14" and is the HOT NEW Paddle for large displacement UTV's.....but 185.00 each is high....

I am currently waiting on a reply from Dave at Fullerton Sand Sports, I saw him at the Sand Show and he states that he has a 12" rim that fits on the Trooper....???? I will post more when I know more...

I would recommend a Set of Paddles for the Rear....Turn your front tires around....4x4 engaged....Rear Locked...Front Unlocked

Going back over all the info everyone has shared, I keep coming back to this. Just can't get my head around why/what turning the front tires around does for us? I believe you that it works,just can't figure out how?

Posted

The stock tire setup on the Trooper has the lugs facing towards the outside, like a farm tractor. The idea is to push the loose dirt to the sides in order to get down to the firmer stuff for traction. Propulsion on the sand comes largely from the weight of the sand that gets thrown rearward. An equal and opposit force thing. Thus, the tires want paddles or the lugs turned to scoop up the sand and throw it to the rear. The faster you spin the tires, the more sand weight you throw rearward and the faster you go or the better you climb. If you have so much tire so that you can't get the engine reved up becaues it just does'n have enough hp, you stay bogged down or in lower gears. Too small a tire, and even if you can spin them, you don't throw enough sand rearward and you will also dig in. Like BuggieDude said but in different words, it's a balance between flotation and available power.

Lenny

Posted

Mine is a 09 only thing i could check for is the brake rotors diameter being 8" or 10"? also there's no cv on end of one rear driveshaft if i remember correctly....

Is there any other more telltale signs to look for?

Sent from my DROID RAZR using Tapatalk 2

The first 50 as they were called. Steel diamond plate deck / skid plate that is weld to the tube frame. Even under the motor. Steel diamond plate deck weld in the cargo rack / roll bar over the engine. Rear driveline with u-joints, no CV joints. The smaller rotors. Gas tank mounted in the front under the hood near the steering. No dust covers on the steering rack. Storage area under the passenger seat. The biggies easy to notice would be the gas tank & weld skid plate.

rocmoc n AZ/Mexico

Posted

The stock tire setup on the Trooper has the lugs facing towards the outside, like a farm tractor. The idea is to push the loose dirt to the sides in order to get down to the firmer stuff for traction. Propulsion on the sand comes largely from the weight of the sand that gets thrown rearward. An equal and opposit force thing. Thus, the tires want paddles or the lugs turned to scoop up the sand and throw it to the rear. The faster you spin the tires, the more sand weight you throw rearward and the faster you go or the better you climb. If you have so much tire so that you can't get the engine reved up becaues it just does'n have enough hp, you stay bogged down or in lower gears. Too small a tire, and even if you can spin them, you don't throw enough sand rearward and you will also dig in. Like BuggieDude said but in different words, it's a balance between flotation and available power.

Lenny

Awesome explanation. Thanks!

  • 2 weeks later...
Posted

Ok, this deviates a little from the thread topic but I thought I would try continuing it here and see if I get any traction.

Like I mentioned in the beginning, I'm planning to make my first trip to the dunes. Glamis sand dunes to be exact. What sites are best for tent camping vs trailer camping? can you ride from north end to south end? Any pointers or tips in general are greatly appreciated! I am meeting up with in-laws from LA who are driving down and I want to show them a good time, know as much about this ahead of time that I can.

Posted

Ok, this deviates a little from the thread topic but I thought I would try continuing it here and see if I get any traction.

Like I mentioned in the beginning, I'm planning to make my first trip to the dunes. Glamis sand dunes to be exact. What sites are best for tent camping vs trailer camping? can you ride from north end to south end? Any pointers or tips in general are greatly appreciated! I am meeting up with in-laws from LA who are driving down and I want to show them a good time, know as much about this ahead of time that I can.

There are a few others that can answer better then I about it but i have only driven past it and from what i saw there are plenty good open areas where you can do both. When are you going there?

Posted

There are a few others that can answer better then I about it but i have only driven past it and from what i saw there are plenty good open areas where you can do both. When are you going there?

The dates are not set in stone yet, but it will be around Nov. 19-20

Posted

Who can tell me about the legalities of running my T2 and a dirt bike in CA.? Spark arresters, safety flags, and permits right? The permits are confusing.... I need a permit to camp, a permit for a campfire, a permit for the T2 and bike to ride on the dunes, a permit per car/truck I drive in? Are any of these permits one in the same?

Posted
Who can tell me about the legalities of running my T2 and a dirt bike in CA.? Spark arresters, safety flags, and permits right? The permits are confusing.... I need a permit to camp, a permit for a campfire, a permit for the T2 and bike to ride on the dunes, a permit per car/truck I drive in? Are any of these permits one in the same?

Correct me if I'm wrong but isn't trooper "carb certificated" ?

Sent from my DROID RAZR using Tapatalk 2

Posted

Whips/Flags are MANDATORY for everything....

The permits are something I cannot comment on as I have not been to Glamis a few years....however, to answer the "CARB" approved question....yes the Trooper and ALL Team Joyner USA models are/were EPA and CARB approved....

Camp sites are everywhere....but I personally like the "Washes" next to the Railroad Tracks on the West side of the Dunes south of the Glamis Store...anywhere south of Wash 7, Than there is Ghecko Road on the East side of the Dunes...I have only camped over there once....but it has Restrooms preiodically along the road and so on....the Washes are STRAIGHT UP camping or RVing...

Riding south to the 8 or to Butter Cup is possible yes....it is a nice 30-40 miles....

I hope this helps...

Posted

Whips/Flags are MANDATORY for everything....

The permits are something I cannot comment on as I have not been to Glamis a few years....however, to answer the "CARB" approved question....yes the Trooper and ALL Team Joyner USA models are/were EPA and CARB approved....

Camp sites are everywhere....but I personally like the "Washes" next to the Railroad Tracks on the West side of the Dunes south of the Glamis Store...anywhere south of Wash 7, Than there is Ghecko Road on the East side of the Dunes...I have only camped over there once....but it has Restrooms preiodically along the road and so on....the Washes are STRAIGHT UP camping or RVing...

Riding south to the 8 or to Butter Cup is possible yes....it is a nice 30-40 miles....

I hope this helps...

Thanks for the info! Do any of the areas have power and/or water?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















    • By MilSurpYinzer
      Hey all, I was just wondering what you guys consider a necessary upgrade or spare part to have or mod onto your machine.
      I'm going for a kind of shtf survival rig that's not going to be SUPER heavy and I'm looking at getting:
      A spare belt (I keep seeing this mentioned everywhere I look so it must be important)
      A spare tire and mount( So would I need a jack like one from an old jeep or something else?)
      Tire chains for the winter
      And maybe a cargo bed upgrade so things don't slide out.
      Bumpers because duh.
      I already installed high output lights and have a windshield, roof, back window, and winch. And I outfitted a Molle panel for the back of my passenger seat with extra supplies like food, first aid, and spare mags.
      Any advise on increasing durability, longevity, and having something on hand because it's absolutely necessary would be a plus.
      Thanks so much!
    • By Outlaw Redneck
      Hello all. I have a 2005 Joyner sand spider 650 with the dreaded broken output shaft on the transmission. I got ahold of a 2007 joyner commando 650 for cheap that had a bad motor but a good transmission. I got it because everything i read said that the transmission would work but it seems that it will not. Due to the commando being 4x4 it has a selectable locker and a small ring gear using a "idler" gear to turn the ring gear which make the output spin the wrong direction. Is there any way that I can make this thing work? I really dont want a commando,  I like the buggy but if the trans wont work then I can only put my motor in the commando. Any help would be appreciated. I have the ring gear from the original trans but the shaft is broken and the shaft from the commando wont fit the ring gear it doesn't appear. 
×
×
  • Create New...