Quantcast
Jump to content


front wheels

dedub

By dedub
in Joyner UTV SxS Forum

 Share

Recommended Posts

Merchant Mariner Enthusiast

Merchant Mariner

Posted
Posted

Dang, you got a strict trail width restriction! +1" total width is a game changer? What about the rears, did you make them narrower or decrease backspacing to fit on the trail? I thought the way they were setup from stock the rear sat wider..... or maybe that was my oversized tires squeezed onto the stock rims.

dedub Collaborator

dedub

Posted
  • Author
Posted
Dang, you got a strict trail width restriction! +1" total width is a game changer? What about the rears, did you make them narrower or decrease backspacing to fit on the trail? I thought the way they were setup from stock the rear sat wider..... or maybe that was my oversized tires squeezed onto the stock rims.

the wheels that came on mine it's 64" wide. i have some steel car wheels that are heavy that makes it 60" wide. the trails we ride in KY. ARE MARKED 58" LIMET. i can get through at 60" and it rubes both sides in some places an hangs on edge of big cliffs some places so yes it matters. front end spindels are wider then back.

nocturnalsixer Rising Star

nocturnalsixer

Posted
Posted
Dang, you got a strict trail width restriction! +1" total width is a game changer? What about the rears, did you make them narrower or decrease backspacing to fit on the trail? I thought the way they were setup from stock the rear sat wider..... or maybe that was my oversized tires squeezed onto the stock rims.

the wheels that came on mine it's 64" wide. i have some steel car wheels that are heavy that makes it 60" wide. the trails we ride in KY. ARE MARKED 58" LIMET. i can get through at 60" and it rubes both sides in some places an hangs on edge of big cliffs some places so yes it matters. front end spindels are wider then back.

U got t2 through that narrow gates!? Ill like to know how too because gates here are also 58-60" and wouldn't accept anything wider

Sent from my DROID RAZR using Tapatalk 2

Kinarfi Veteran

Kinarfi

Posted
Posted
the wheels that came on mine it's 64" wide. i have some steel car wheels that are heavy that makes it 60" wide. the trails we ride in KY. ARE MARKED 58" LIMET. i can get through at 60" and it rubes both sides in some places an hangs on edge of big cliffs some places so yes it matters. front end spindels are wider then back.

What car did your wheels come off of? Wish I had some advice, but I don't?

Yes I do, My son has an RZR4 and the trailer he is using is too narrow for it, so he runs a ratchet tie down strap from A arm to A arm and cranks it up so that it is narrower and rides higher, perhaps you can try the same for areas that need to be narrow.

dedub Collaborator

dedub

Posted
  • Author
Posted
What car did your wheels come off of? Wish I had some advice, but I don't?

Yes I do, My son has an RZR4 and the trailer he is using is too narrow for it, so he runs a ratchet tie down strap from A arm to A arm and cranks it up so that it is narrower and rides higher, perhaps you can try the same for areas that need to be narrow.

older mitsubichi car wheels from junk yard

dedub Collaborator

dedub

Posted
  • Author
Posted
Haha if I don't fit I just find a way around

not were we ride theres not rume to turn around you will back up for a mile or two if lucky. some times you can't make the corners going backwards the front wheels fall over the edgeh half to winch back over to get around corners. pretty tight.

plumber Proficient

plumber

Posted
Posted
hey plumber going their riden march 21. you whoun't to go. we go to willey beagley camp grounds an ride dainel boone forstry

Hey Dave it's so hard for me to plan something I'll let you know when it gets closer. I need to go it's been awhile since I been riding.Is it a 60" wide restriction my trooper is 64" wide

dedub Collaborator

dedub

Posted
  • Author
Posted
Hey Dave it's so hard for me to plan something I'll let you know when it gets closer. I need to go it's been awhile since I been riding.Is it a 60" wide restriction my trooper is 64" wide

they been maken them wider a lot of rzrs been going their you'll make it tight in spots.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • Sammy
      2017 TW450 Kohler ECH440 runs out of fuel when running wide open.
      By Sammy
      Runs fine just putting around the yard. Get it out on the road and about a half miles it runs out of gas. Let it idle for a few minutes and it will run for another half mile and do it again. Replaced both fuel pumps and filter. Does anyone know if I can get rid of the factory fuel pump?
    • Eman85
      Best place to find info on Hisun or Massimo UTV's
      By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • paul allen
      2016 wildcat tail front axle rubber boot
      By paul allen
      right front axle cv joint boot keeps getting torn up from the inside out....the stock one was damaged from a stick...i have replaced  the axle 4 times with aftermarket axles that fit fine..after 4-5 miles of riding even on grass.the outer boot get torn up from the inside out...all 4 brand new alxes...bearings are fine nothing bent everything fits just fine....nothing seems to be binding.....any thoughts?????
       
       
      thanks...pa
       
    • Outlaw Redneck
      How to make a commando transmission work in sand spider
      By Outlaw Redneck
      Hello all. I have a 2005 Joyner sand spider 650 with the dreaded broken output shaft on the transmission. I got ahold of a 2007 joyner commando 650 for cheap that had a bad motor but a good transmission. I got it because everything i read said that the transmission would work but it seems that it will not. Due to the commando being 4x4 it has a selectable locker and a small ring gear using a "idler" gear to turn the ring gear which make the output spin the wrong direction. Is there any way that I can make this thing work? I really dont want a commando,  I like the buggy but if the trans wont work then I can only put my motor in the commando. Any help would be appreciated. I have the ring gear from the original trans but the shaft is broken and the shaft from the commando wont fit the ring gear it doesn't appear. 
    • kmiller7351
      Trying to get 550 Colman running
      By kmiller7351
      Trying to get running a 550 Colman running but I think head gasket went bad. Do i just replace with new gasket, clean up and replace or is there more to it?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...