Quantcast
Jump to content


Recommended Posts

Posted

Wow, I just changed the oil in my Diffs and I think I should have done more often. When I drained the front diff, the oil was dark and looked like it was full of metal, when I drained the rear, it looked like liquid aluminum with pearl powder. The transmission oil looked normal and like it didn't really need changing. I have 2530 km on the front diff and less on the read because the dealer had to fix my locker. What did your oil look like and how often do you change it?

Posted

I noticed that on my 1st demo a Commando and have been using Morey's heavy duty oil stabilizer in all diffs since. The metal shavings just goes to show how important that 1st oil change is & this occurs in all areas when running in. The diffs tend to get forgotten so use the best product you can. kinarfi, mate I like your idea with the nail and as this is constant issue with me, I'm going to try that one.

Cheers Mike

Posted

I changed my diffs and tranny at 250 miles as it says in the maintenance schedule. And it had some metal in it. I will be changing it again shortly. I changed all the the screws and nuts to hex head bolts. Also put the nut on top as some had to be cut off from scraping across rocks.My air filter and prefilter will be here today.Now I just need to move the intake up over the top of the cage.

Posted

While I was under my trooper changing oil, I noticed how large the fuel line was, It looks to be about 1/2 " ID, I was expect to see something like a 1/4 " line. If I go down a steep hill and this line empties, that's a lot volume to refill, other than moving the pump up next to the tank, has any one done any thing else to the fuel system?

Thanks,

Jeff <_<

Posted
Wow, I just changed the oil in my Diffs and I think I should have done more often. When I drained the front diff, the oil was dark and looked like it was full of metal, when I drained the rear, it looked like liquid aluminum with pearl powder. The transmission oil looked normal and like it didn't really need changing. I have 2530 km on the front diff and less on the read because the dealer had to fix my locker. What did your oil look like and how often do you change it?

Also, when I drop the skid plates, the bolt turns when I try to undo the nut and I can't get a screw driver on to bolt, so after I get the bolt out, I put nail head into the phillips slot and weld the nail to the bolt so it can't turn. Works well. As soon as I get a Photo, I'll add it this post. :blink:

10 hour or 250 miles

40 hour or 250 miles

40 hour or 500 miles

80 hour or 750 miles

120 hour or 1000 miles

This is what is in the joyner paperwork when they want you to service it at first... I can ask if you want to know after these miles and hours when you need to do service work on them...

~Meg

Posted

You want that fuel line big, it is on the suction side of the pump. I really do need to get some pictures for you guys & gals. I mounted the fuel pump next to the tranny on the tank side using the exsiting bracket for the pump. Had to drill a extra hole in the bracket. very easy to do and it also looks very neat.

Posted

I was putting the skid plates back on today and while my "nailed bolt" work Marvelously, they had a tendency to fall out or push up as I tried to put the nut on, so, I took a milk jug and cut it into strips and made holes in it with a leather punch and then cut into pieces, then put the pieces over the bolt to hold it in place while I'm putting the skid plate on. Worked great. :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By paul allen
      right front axle cv joint boot keeps getting torn up from the inside out....the stock one was damaged from a stick...i have replaced  the axle 4 times with aftermarket axles that fit fine..after 4-5 miles of riding even on grass.the outer boot get torn up from the inside out...all 4 brand new alxes...bearings are fine nothing bent everything fits just fine....nothing seems to be binding.....any thoughts?????
       
       
      thanks...pa
       
    • By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • By Jody Deville
      I’m looking to best place to buy replacement axles for the rear in my buggy. Both axles are bad. Where is the best place to find them?
×
×
  • Create New...