Quantcast
Jump to content


Recommended Posts

Posted

I think that is more the "norm" of modern irresponsible youth who rarely face any consequences for their actions ..My generation appreciated what we had as most of us worked hard to get it .. now kids just put it on the VISA  their mom pays the bill for . When , not if,  they tear it up, mom will buy them another BETTER one .. just my opinion

Posted
1 hour ago, Joe Breaux said:

I think that is more the "norm" of modern irresponsible youth who rarely face any consequences for their actions ..My generation appreciated what we had as most of us worked hard to get it .. now kids just put it on the VISA  their mom pays the bill for . When , not if,  they tear it up, mom will buy them another BETTER one .. just my opinion

And it's an entirely valid  opinion--but now yo've got me going, My apologies in advance...I don't get out much anymore...

My mid-20s/early 30s college dropout step-grandsons are just as you describe. Always had all they wanted on a silver platter; the "boys" their mother still calls them.. College (also paid in full by mommy and daddy) was too much like work so they couldn't hack it. The oldest "works" as a barmaid at Starbucks, The other two live in a house mommy & daddy bought for them while still in college and fart around as underlings in the IT industry (that's how daddy made his fortune to support all this silliness) so they get to ride on that.

If you give someone something for nothing that's just exactly what it's worth to them.

Not understanding that was the fundamental flaw in the "Great Society" scheme¹. For  60+ years we as a society have been subsidizing poverty, failure and irresponsibility--and the more of an irresponsible loser you are the more we'll give you. In doing so the leftists created a permanent underclass of  poor, irresponsible, losers--who unfortunately are allowed to vote (the only real reason they are allowed to exist).. 

Often makes me glad I'm going on 75 and in poor health--I won't have to see where this is all going...

Republics decline into democracies and democracies degenerate into despotisms.
-Aristotle-

This is where w are now--it's a collective despotism, with respect and authority vested in specific groups,  but despotism nonetheless.

----------------------------------------------------------------------------

¹- The Great society was based on a notion that everyone "deserved" a middle-class lifestyle. What was left out was that attaining that would require conducting your self and behaving as a such (which at the time was primarily the "Greatest generation"; founded solidly in work ethic and personal responsibility--Hell, they had just defeated REAL Nazis...   

  • Like 1
Posted

well, as we know   from all the signs in our national parks...   DO NOT FEED THE ANIMALS...THEY WILL BECOME COMPLETELY DEPENDENT AND BE UNABLE TO FEED THEMSELVES     and starve ...... ..   and thats what happening to our once great country .....again, just my opinion... 

  • Thanks 1
Posted

You mean that  "mostly peaceful" virus?

We have not had any of that lockdown nonsense here in Florida, as we are fortunate the have a Governor with an actual functional brain, who respects his constituents and believes we the people when provided with solid, non-sensationalized facts have sense enough to exercise appropriate precautions without being dictated to do so. If "the Donald"  does not run in 2024 and Ron DeSantis does he's got my vote...

Posted

unfortunately our gov is left-brained and thinks everyone should put theirs in neutral and let him do all  the thinking for us.. After all, he is so much smarter than we puny humans are .. And obviously masks worked so well that we shattered record after record after record  of China virus cases while we all walked around looking like liquor store robbers with t-shirt material on our faces expecting a single layer  polyester/cotton blend to filter out particles so tiny  that only a microscope can see.. Now he wants another  39 cent /gal tax on gas plus the 22 cents we have now,  and higher tax on all our offroad vehicles to punish us for not " getting with the global warming doctrine "  and buying solar powered 4wd UTVs......... Since  The solar panels worked SO GREAT in Texas last week....   but I digress.......  in related news, my MSU 500 still running perfectly. with a few YAMAHA parts substituted 

Posted
2 minutes ago, Joe Breaux said:

unfortunately our gov is left-brained and thinks everyone should put theirs in neutral and let him do all  the thinking for us.. After all, he is so much smarter than we puny humans are .. And obviously masks worked so well that we shattered record after record after record  of China virus cases while we all walked around looking like liquor store robbers with t-shirt material on our faces expecting a single layer  polyester/cotton blend to filter out particles so tiny  that only a microscope can see.. Now he wants another  39 cent /gal tax on gas plus the 22 cents we have now,  and higher tax on all our offroad vehicles to punish us for not " getting with the global warming doctrine "  and buying solar powered 4wd UTVs......... Since  The solar panels worked SO GREAT in Texas last week....   but I digress.......  in related news, my MSU 500 still running perfectly. with a few YAMAHA parts substituted 

If I may be so bold to ask, where are you?

Posted
On 3/2/2021 at 6:39 PM, Joe Breaux said:

I am in the other hot muggy aligator infested swampland state         Sportsman's Paradise.... Louisiana.... and yes I do eat CRAWFISH ..lol

They're fun to play with--I have  rather large top-water spinner they like to chase...

  • Like 1
Posted
32 minutes ago, Joe Breaux said:

the crawfish or the gators? 

The gators...

I once was fishing from the shore and a 5 or 6 footer followed the lure in to 25 feet or so offshore, than turned and swam off. I did this a few more times and on the 4th or 5th cast he followed it in and dived instead of swimming off--I made a hasty retreat; those guys can move pretty fast for a bit even out of the water...

Posted
11 minutes ago, T-boss 410 said:

I don't know how you could be fishing in an area where they are, anyway. 

it's Florida--my wife is a native and when asked by visitors as to whether a particular body of fresh water "has alligators?" she says "Only if it's wet." There's no place to fish for bass here that doesn't have gators.

Disney World is crawling with them...

Posted
4 hours ago, T-boss 410 said:

I would think that it would be dangerous to bass fish, if that's the case. 

I'm sure it is, then again they tell me riding motorcycles is "dangerous" too--I've been doing that for over 60 years.

Danger and I are old friends, ny uncle taught me all about it when I was 19. It was my Uncle Sam, he gave me a new fangled barely tested lightweight aluminum and plastic thing called an m16 and sent me to a place called Vietnam. I was there for 13 months and when I got back I found that regular run-of-the-mill  danger did not bother me a whole lot.

I have found that I am at times--such as when people are almost literally pissing their pants over a particularly  bad strain of the flu--oddly pleased I had that experience as I do not have to shake in my boots (which I am not ashamed to say I have literally done) each time someone tries to convince me the sky is falling.

"The whole aim of practical politics is to keep the populace alarmed (and hence clamorous to be led to safety) by menacing it with an endless series of hobgoblins, all of them imaginary."
-H. L. Mencken-

^^^This^^^ is as true a thing as has ever been said. It and my experiences as a 19-year-old kid are and parcel  part of the reason the Government and I don't get along well--they trained me to smell bullshit from 14,000 miles away...

See, you got me "going" again...

-----------------------------------------------------

H.L. Mencken was a brilliant man (more quotes here). I wish I could have known him.

 

Posted
9 hours ago, T-boss 410 said:

I don't know how you could be fishing in an area where they are, anyway. 

really?   EVERYWHERE we fish here has gators.. I went last Saturday and saw at least 6 sunning themselves while we fished, 20 yards away .. When we were young, many decades ago, we waterskiied  there too..          the ones 7 feet or less are afraid of humans and usually run or swim away.. But the 10 footers or larger are afraid of NOTHING!  I carry a Sig .40 just in case .. once in awhile one gets curious and will swim up to my boat.. a little tap on his snout with a paddle usually is enough .. I have hooked a couple using live baits .. best to just cut the line        oh, btw, did I mention we EAT gator here ?  and the gators KNOW IT!  lol

Posted
15 minutes ago, T-boss 410 said:

Ahhh, I see. You let them know that they are just as much the prey as you are! Sounds like a struggle for the top of the food chain to me, lol.

They are like most wild animals. more afraid of you than you are of them--just two rules:

1) Don't get one cornered, especially a bull;

2) Don't get between a cow and her hacthlings;

Posted
1 hour ago, T-boss 410 said:

Ahhh, I see. You let them know that they are just as much the prey as you are! Sounds like a struggle for the top of the food chain to me, lol.

and until they learn to swim faster than 1080 ft/sec .... I WIN 

Posted

now when you catch a RedFish this size ,like my step-mom did here ,  you might attract a really BIG gator while its fighting, on Marsh Island.. Its  brackish/salty water but still full of hundreds of gators.   Just a typical fishing trip here 

Seafoam2.png

Posted

I worked in Lafayette, New Iberia and Houma for Big Red my Job as Auditor for Hazardous materials from 1982 to when I retired in 1997 and didn't let them gators bother me either Did a lot of fishing. several times I had to swing around some of the big ones when they decided to warm themselves on the road or just slowly walk across the road.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By barticus73
      I am looking to buy a small UTV to do work around my property and priced a brand new Massimo T-Boss 560 through Lowes @ $10,500 out the door or a Dealer sold CFMOTO Uforce 600 at $11,500 out the door.    Are there any glaring reasons to go with the Uforce 600 at an extra $1000?  Is one model more reliable than the other?  Any input greatly appreciated.
       
      Thank you,
       
      Jerry
    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By Chile
      2018 Massimo MSU 700 EFI. I realize that this engine is essential the same as in all of the HISUN based Yamaha clones out there. I am in the process of performing a top end diagnosis/rebuild. I have an AMAZON top end rebuild kit on order in anticipation of this activity. 
      Question 1:  When exploring the myriad of top end rebuild kits on the market for these units there are some cylinder assemblies that have "686 cm3" badging next to the cam cain tensioner boss. Others compatible with the unit do not have this badging. The existing cylinder assy does not have the 686 badging. I am assuming that this simply verifies that the cylinder assy is for a 686 cm3 engine which of course the stock 700 series HISUN engines are. Am I missing something here or is this just a manufacturer artifact? With or without the badging the application listings all indicate compatibility with the MSU 700 series engines.
      Question 2:  I have reviewed at minimum a dozen videos associated with this rebuild. To date I have not found one that deals with piston/cylinder clearance and/or ring gap verification. The advertised specifications for these various "top end rebuild kits" all indicate: Cylnider bore = 102mm and piston diameter=101.5mm. The math yields a .5mm (as in 1/2 mm) difference. That seems to be a very large piston/cylinder clearance.  I realize I am referencing advertised specs rather than emperically measured values but the numbers have gotten my attention.  I have referenced the FSM and found it to be somewhat confusing in this regard. Hopefully the experts on this forum can enlighten me as to where my observations are faulty here.
      Any and all assistance is greatly appreciated .
      Thank you all in advance,
      Chile
    • By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
×
×
  • Create New...