Quantcast
Jump to content


Recommended Posts

Posted

Not to hijack; because it's within the decription;...........But will stock rear wheel/tire fit on the front with a 1.5 spacer? I'd like to go with the same sized tire all four corners, and I think it will help the "crawl" traction. Plus I can just carry 1 extra wheel/tire with me.

Posted

I carry an undersized tire & rim as a spare to save weight. The spare is just to get me back & I am pretty confident that I can get back from anywhere with anything as a spare.

rocmoc n AZ/Mexico

Posted

So will it fit with spacers?

My self, I do not know, try it and then let us know, that way we all learn from each other, that's what we're all about.

I trade my rear wheels for some front wheel and run General Grabber AT2 27x8.50 R14 95Q 6PR all the way around, love 'em.

but while here on the subject, is our wheel bolt patter 4 X 115, I was think that's what I remember, I looked up the dodge neon and it's 4 X 100, so I think I'd worry about that, but it would be nice to have a steel rim off something like that so we could mount up a second set of tires for road or dirt or sand.

Kinarfi

Posted

I though it was 4X110

4-115 is the pattern.if you put spacers on the front would that not make the front wider then the back? thus you would have to compensate by putting spacers on the rear? maybe im lost. :huh:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Topics

    • By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • By mehe
      Hi everyone and I hope that is not a too forward questions for us newbies. 
      My husband and I are ready (next Spring) to open our newly developed nudist campground in Iowa and we are now looking for interesting activities to host. 
      Don't worry we are not going to try and sell you a membership because as of 2 weeks ago all of our 50 campsites are sold out for the 2024 season. 
      It was my job to sell site and now that is complete i am looking for interesting actives host for weekend. 
      We have 300 acres of woods, grassland, swamps and 2 small ponds/lakes and dozens of miles of riding trails.
      we have gotten county approval for the complete 300 acres to be clothing optional. 
      We think we have a great spot for a weekend or several day ATV / mudder event. 
      Clothing would be optional for all participants and plenty of room for overnight camping and outdoor group showers. 
      Now we are looking to you pro  ATV riders to let us know if you think your group of people would fit in with ours. 
      Feel free to ask anything you would like to get a better idea of what we offer.

    • By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • By Fmaxiron
      Hit a rock last weekend and trashed my front A-arm and axle on my Outlander. I’ve been looking around for reliable sources for replacement components. A lot of listings online look a bit hit or miss, so I’m trying to figure out what’s actually worth trusting.
      Has anyone here had good luck with dealers or sites where you can buy genuine Can-Am spare parts online without worrying about quality issues or fake OEM stuff? I’d rather pay a bit more and get the right fit than deal with problems later.
      Any recommendations appreciated.
×
×
  • Create New...