Quantcast
Jump to content


Computer Controler for fuel And timing

silverbullet

By silverbullet
in Joyner UTV SxS Forum

 Share

Recommended Posts

silverbullet Experienced

silverbullet

Posted
Posted

We have been working with a ECU tuner .We have sent him all the connectors he needs to connect to Troopers .We should get one this week for testing.We have instaled a exhaust gas senser and exhaust temp senser on are Trooper ECU is set up all wrong. This info will be able to help him zero in on the exact set up on the controler.This also will work on the timing for max.torque. Be for we do any thing we will Dyno in all modes.We will see how good it works hopefully not to expensive.WE have been busy working on the ball joint issue.We have come up with an up grade to the stock ball joint we had custom ureathane boots made to fit tight and not rot or fall apart.We have instaled a grease fitting on the top and have found a grease made for cranes that will not break down or wash out.We are so sure that this will solve the ball joint issue,We are going to warrantey them for 1 year that the boot will not rot or fall off and ball joint will not fail.We will offer the grease if customer wants to perchase some it works great on the c/v's and steering boxes.It will make them run cooler than any grease that comes with c/v's

We have gotton our sintered metal brake pads they will stop a trooper with 31" tires.Great for- sand- water and mud.They should last longer than stock ones.They use these on race motorcycle's

We will have prices in about 1 week.On most products.Bilstein shocks for Trooper's coming soon and they will be affordable!

Silverbullet

silverbullet Experienced

silverbullet

Posted
  • Author
Posted

Great Rick Let me know about that ecu

We should have ECU this week.We will dyno early next week.We wlll still have to due a few test to set it up.We want something that dose not go out of tune like some ECU did in the past.

silverbullet Experienced

silverbullet

Posted
  • Author
Posted

Wow...Bilsteins! B) Are these the upgraded shocks that newer Joyners have; or strictly aftermarket? Adjustable? Remote reservoir?

We are working with bilstien to set them up for Troopers T2 T4 Vipers Geting the price down is the hard thing.These are aftermarket shocks not stock Joyner shocks the rear will have remote reservoir the front's we are still working on.

  • 2 weeks later...
Banjo Minnow Enthusiast

Banjo Minnow

Posted
Posted

We are working with bilstien to set them up for Troopers T2 T4 Vipers Geting the price down is the hard thing.These are aftermarket shocks not stock Joyner shocks the rear will have remote reservoir the front's we are still working on.

Anymore info on the shocks?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • Gerald Dillman
      2008 Joyner trooper transmission parts
      By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • SkyPilot56
      working on a coleman 550 out fitter
      By SkyPilot56
      working on a coleman 550 out fitter , had a shit load of codes, coil, injector , and the map sensor for fuel injector replaced all 3 and figured it would start , but no joy have spark (new plug also and inline fuel filter) cleared the codes and still have the engine light , turns over fine but damn thing still will not start, friends daughters were driving it and turned it off to park , and went back to start it and same thing turns over but will not start , with this machine anyone have any ideas as to what the hell , I should be looking for , no plug's unplug checked wires none seem to be pulled apart or broken !
    • Edelbrock
      What UTV should I buy?
      By Edelbrock
      So I'm interested in a side by side of some sort.
      Not sure what make/model to even look at.
       
      I would plan on riding on trails with very rough rocky terrain and plenty of mud. Maybe sand once in a long while. I like LOTS of power and drive fast, but also like a trail that is a challenge to get through. I think 4x4 would be a must. I like the idea of a supercharged engine, but I have never owned one, and would be a little concerned about long term reliability or expensive difficult engine repairs. If anyone knows quads, my favorite was the 2008 Polaris Outlaw 525 IRS. For dirt bikes, I raced a 2008 KTM 450 SX-F. So that gives you an idea of what type of off road stuff I liked.
      I don't like "utility quads" or "trail bikes". And likewise, I dont want a turd UTV. I want something that looks awesome and performs awesome. 2 seater with some cargo capacity at the minimum.
       
       
      Thoughts?
    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...