Quantcast
Jump to content


Recommended Posts

  • Alex changed the title to Massimo Buck 400 Top speed
  • 2 weeks later...
Posted

 I can not figure this out. I can get the same speed in high or low range. Rpm in high is 4500 in low range it is 7000. same speed. I use it on my small farm but some time I will go to the river to fish or visit friends several miles away. I am not a kid trying to tear things up I am a 70 yo disabled Vietnam Vet. I would just be happy at 30mph. I sent e-mail to factory but never got a response. My local service dealer is closed over this viris scare. Any help would be welcome.

Posted

Richard

You might try changing the oil. They have a wet clutch and require API SG oil.  Mine did way better when I changed mine.  I used Castrol Motorcycle oil as it was the only one I could find out here with the SG. I'm 70 years old as well.

Posted (edited)

I did change oil, no change. It is hitting the rev limit when in gets to 23, no slipping of clutch it will pull a hill with no problem just will not go any faster than 23.

Took it out today put a few more miles on it when I got to 75 miles it did better, now I can get 24mph before the rev limit .

Edited by Richard Schleper
Posted

23 mph seems low.  My MSU 500 does 38 mph ... on the days that it actually runs .. Oh btw, dont bother calling Massimo... they rarely answer, never call back if you leave message, and if they do, they know nothing and wont help you in any way 

Posted

I'm sure there's a limiter. I've had my mule on a robust downhill plunge. Got er up to a whopping 40 mph. Got a little scary, because this thing drives like a tractor. It's probably limited for a good reason. 

  • 2 weeks later...
Posted

Hey............I too have about 50 miles or so but have had the Buck for about 10 months.....just did my first oil change today.  I get 27 to 30 mph in low and 40 mph or so in high.  I've only tried high a couple of times (bc of breakin period) so I suspect it will go faster.

Posted

Richard, I'm betting you have the wrong ecu in your machine.  Call Massimo and  they will send you the right one.  Where the law limits slow moving vehicles to 25 mph is where the ecu you have is used.

Posted

Massimo does not answer emails or phone calls. and never return phone messages.. They got your monery, they could not care less what problems you have.. They arethe worst company I have ever seen. Try ordering the part online from others 

Posted

Update after oil change (crazy that there is no oil filter).  Yesterday in low with my wife (I'm 235 lb and she's 130 lb) - 27 mph at 8000 rpm (started to hesitate consistently at this speed and rpm); 45 mph in high around 5500 - 6000 rpm.

  • 2 weeks later...
  • 2 weeks later...
Posted
On 8/14/2020 at 9:19 AM, Joe Breaux said:

23 mph seems low.  My MSU 500 does 38 mph ... on the days that it actually runs .. Oh btw, dont bother calling Massimo... they rarely answer, never call back if you leave message, and if they do, they know nothing and wont help you in any way 

I got my Buck 400 up to seventy -five MPH yesterday, I slowed down to 55 MPH because  I was afraid the top was gonna come off and I was on a Farm to Market road.

 

🎌

 

Yeah It was on a trailer behind my old Chevy pickup!

Posted
22 hours ago, Mackc said:

I got my Buck 400 up to seventy -five MPH yesterday, I slowed down to 55 MPH because  I was afraid the top was gonna come off and I was on a Farm to Market road.

 

🎌

 

Yeah It was on a trailer behind my old Chevy pickup!

Comment of the year!!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • By Mitch13
      2022 Coleman 400 with 13 hours on the engine and the mice got to it. Every wire coming out of the steering column in one cluster has been eaten through. I tried reconnecting matching wire colors to each other and I get the left turn signal and hazards to work, nothing else. If I play around a bit I can get the horn to honk or headlights to come on but only when I connect them to the brown wire. Obviously I don't know what I am doing here. Does anyone have a picture of how these wires are connected when they are under the hood on the drivers side coming from the steering column?
      Gray - seems to carry power
      Brown - left turn signal
      Green with purple stripe - hazards?
      Pink with red stripe - horn?
      Green - head lights?
      Yellow - head lights?
      Yellow with red stripe?
      Blue?
      Dark green?
      There is also a bundle hanging under the hood not connected to anything green with yellow strip, brown and blue?
      Other than that issue, I am about ready to sell this for parts if you interested let me know.
      Thanks
    • By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
    • By Eman85
      I just purchased a Massimo MSU500 and no manual came with it so I have some questions. looking for part #'s and availability of basics like spark plug air and fuel filter. What is the valve adjustment specifications? 
        Is there a fuel drain? It's been sitting, low mileage but I want to drain out the old fuel and put fresh. 
×
×
  • Create New...