Quantcast
Jump to content

Joyner R2 Windshields


JK joyner

Recommended Posts

Hi JK 7 welcome to UTV Boards and glad to see another Renegade owner here. I have just recently got some American made Joyner Trooper Lexan Windshields and full enclosures made up for some members here at a cost rate (well and truly below the retail cost) so I could market and sell them on my website. I am also looking for Renegade R2 & R4 owners for the same reason. This will happen, its just a matter of locating at least five customers for each model to get these made up. They are made by GCL UTV Enclosures in Paris Kentucky. I will need one donor UTV for each model & they will receive an enclosure or Lexan Windshield for well below the cost rate. If you or anybody reading this, that lives near Paris KY and has a Renegade R2 or R4, please contact me and I will sort you out a folding or fixed Windshield, or full enclosure.

My website is http://www.pacificeagleutv.com/ and from there, go onto Joyner Trooper T2 to view a one of our fixed Joyner Lexan Windshields.

JK of note, the R2 and R4 Windshields are the same size and a folding Windshield will be more expensive than a fixed one.

Cheers Mike.

Link to comment
Share on other sites

Does anyone have a dealer that can provide a fold down Joyner windshield for under $200? I have looked all over the web and I only have found one for the Joyner. The issue is they are asking over $400 for it and that's without the install. Any help out there would be appreciated.

Welcome jk,

good luck finding the windshield.I doubt you are going to find a fixed windshield for that price not alone a fold down one.

Link to comment
Share on other sites

Does anyone have a dealer that can provide a fold down Joyner windshield for under $200? I have looked all over the web and I only have found one for the Joyner. The issue is they are asking over $400 for it and that's without the install. Any help out there would be appreciated.

You might also try looking at Golf cart windshields.I purchased a fold down one for a cart I had.You might get lucky and find a size that would work or maybe get ideas and fabricate your own.

Link to comment
Share on other sites

Welcome jk,

good luck finding the windshield.I doubt you are going to find a fixed windshield for that price not alone a fold down one.

Silverbullet

We have laxan windshields 1/4" Renegade it has bow in the middle slightly and carved at the top

Rengade have a large roll cage so the bow stopes the buffering and roll at the top to move the air up over the roof.It comes with a slight tan tint or clear if you like.All hardwhear inclueded

299.00

We may be making a fold down windshield for Joyners in the future.We do carry plexiglass but scratchs easy.125.00

Saftey glass works great.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Mark T
      MY 400 is gutless. I would like to know if I can upgrade to a larger engine ?
    • By DLJ
      Have a Hisun 800 it runs for about 35 minutes then stalls. Crank's over but has no spark. Let it sit for 15 to 20 minutes and it starts and runs again for about 35 minutes. Changed the CDI / ECU controller and still does it.
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By KMart
      I have a Massimo 400 Buck that overheats and the antifreeze blows out of the motor everywhere! I don’t have to be doing anything but just driving through the field.  It only has 26 miles on it.  I don’t think the fan is turning to cool the motor.  Any ideas how to fix this?
    • By Michael Wood
      I have a 2018 Massimo Buck 400 with 278 miles. 
      Having issues with my brakes. Took the buggy hunting and when I let my foot off the gas pedal it pulls without pressing on the brake. I looked and the pads on all 4 wheels are all toast. The E-Brake hasn’t been on since I have had it. I am guessing it may be a master cylinder issue because all 4 pads are gone. They all seem to have worn evenly that’s why I think the master cylinder. Just got the machine used from a older couple and they said it sat for some time in there pole barn. Possibly the brake lines? Calipers? I took one brake apart and when I depressed the caliper it didn’t stay. Any help is muck appreciated. 
×
×
  • Create New...