Quantcast
Jump to content

I have terminated my connection with Joyner.


brostar

Recommended Posts

This afternoon (NZ time) I have decided to stop importing Joyner in New Zealand. This especially includes any spare parts and for that I feel bad for my customers over here that need them. The decision has not come lightly, but it’s one I’m forced to make. I wish the guys at Joyner USA Inc. all the best as I do all the Joyner dealers that gone through so much pain in the 18 months or so. These are good Joyner people and hope you Joyner owners will carry on supporting them. I admire them for staying loyal and hope the brand takes off again. A lot of hard work has gone into the new Joyner models, in particularly by Ken Morris. I just hope the manufactures don’t stuff it up :unsure: .

I too am very loyal to the brand, but can no longer entertain the thought doing any business with the Joyner manufactures for reasons I’ll keep to myself, for now.

Take care you guys & gals and for those going to the Jamboree have a bloody good time and stay safe.

Ka kite anō

Mike.

Link to comment
Share on other sites

Well. don't know what to say? But make sure you stay in contact on forum, have enjoyed visiting with you, & appreciated your help! Please continue to visit on forum,, Hope everything else is going ok in your life,, wish you the best,, friend always,,Quig,,from Idaho

Link to comment
Share on other sites

Thank you all for your kind words. It really was a painful decision but I really had no choice. I still love the Joyner brand and that’s one good reason to move on now and keep those memories.

One of the other reasons that I have come to this decision is the continuation of the earthquakes that are slowly killing our economy. Another two big ones this week feel on the same day and another 150 commercial buildings destroyed. We are witnessing the death of Christchurch and we as a nation can afford it. All that been said, that’s not the main reason I have called it quits, not even close.

It would be impossible not to continue popping into UTV Boards every day for a look and don’t worry, I’m not going to disappear from here. After all, I have to keep up my contacts to get spare parts for my Trooper. Oh the irony in that.

Cheers Mike.

Link to comment
Share on other sites

Rick I have advised my customers to try Joyner Australia, only because he is the closest, but I never hear anything from him after I have sent emails. I’ve even supplied one of his customers with parts because he can’t be bothered. I really need to make sure my ex-customers are looked after as there is no way I will leave them in the lurch and will go all out to source parts for them. Thanks for your offer and will mention your name as enquiries come in. I am working on something concerning Joyner parts, so we will see how this works out.

I really feel bad for my customers and to be honest, that's probably the main reason I’ve kept going for the last six months.

Cheers Mike.

Link to comment
Share on other sites

  • 2 weeks later...

This afternoon (NZ time) I have decided to stop importing Joyner in New Zealand. This especially includes any spare parts and for that I feel bad for my customers over here that need them. The decision has not come lightly, but it’s one I’m forced to make. I wish the guys at Joyner USA Inc. all the best as I do all the Joyner dealers that gone through so much pain in the 18 months or so. These are good Joyner people and hope you Joyner owners will carry on supporting them. I admire them for staying loyal and hope the brand takes off again. A lot of hard work has gone into the new Joyner models, in particularly by Ken Morris. I just hope the manufactures don’t stuff it up :unsure: .

I too am very loyal to the brand, but can no longer entertain the thought doing any business with the Joyner manufactures for reasons I’ll keep to myself, for now.

Take care you guys & gals and for those going to the Jamboree have a bloody good time and stay safe.

Ka kite anō

Mike.

Goodluck to you Mike, looking forward to see you on this forum again, I hope that everything will work out for you !!! Goodluck in what ever you do.

Stevozz

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By hdtran
      Hy (pronounce he), just bought a Hisun Sector E1.
      I'll be using it to haul logs and stuff in the Sangre de Cristo mountains.
    • By Steve B
      My "R" light on the dash will not go out when I take the UTV out of reverse and put it into any other gear. Is this just the light switch issue or will this effect engine performance in the other gears?
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By Smittay
      (posted a similar question to the Hisun folks) Looked at a lot of UTVs lately. Couple Questions about Massimo. Some people say they are just cheap with no customer service. Other people seem to have no problems with them.
      Any opinions on Massimo durability?
      Heard parts might hard to get. Is that true?
      What models are the best?
      If you had one and didn't like it what do you recommend? 
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
×
×
  • Create New...