Quantcast
Jump to content


Update of early Trooper Owners!!

rocmoc

By rocmoc
in Joyner UTV SxS Forum

 Share

Recommended Posts

rocmoc Grand Master

rocmoc

Posted
Posted

This is rocmoc/Michael one of the first on this forum when the Joyner was one of the most active topics.  First an update of others.  The earlier members will also remember Lenny and Jeff.  With myself we organized the first Jamborees in 2009-2012.  Sadly if you have not heard we lost both Lenny and Jeff in 2018.    A great loss to the community.  Myself:  Still around but rolled over to Jeep and Arctic Cat Wildcat.  The Wildcat  design still remains me of my old 2008 Trooper.  Doing well as the Last Man Standing but cleaning out the garage.  Found some New and used Trooper parts I will list in the parts section.  Wanted to give you all a chance before I list on Ebay.  As many of you knew Lenny listed a lot of stuff on Ebay.  Will I partnered a lot of the stuff with him and I still have stuff.  Take care and I will check in for message should you want to ride.  Still make it to Utah every other year and am still in Southern AZ.

rocmoc in AZ/Mexico

  • Like 2
Alex

Alex

Posted
Posted

Hi @rocmoc ! Thank you so much for the update, I was surprised/happy to see you back on here...You and a few others are responsible for bringing UTVBOARD to life, specifically driven by Joyner topics in the earlier days. Your contributions were always appreciated. I do hope you’ll stick around when you have time. Very sorry to hear about Lenny and Jeff. 

rocmoc Grand Master

rocmoc

Posted
  • Author
Posted

For certain, try to make it at least once during the winter.  We are always in the Motorhome with dirt bike and SxS or Jeep.  This winter my brother will be meeting us with his dirt bike and 5er.  Jan or Feb, not tied down yet.

rocmoc n AZ/Mexico (Michael)

Gerry Rookie

Gerry

Posted
Posted

We are in the Tyson Wells vendor area across from the discount grocers where K&B tools is at...ask anyone they know us. Know lots of cool rides here.

brostar Proficient

brostar

Posted
Posted
On 9/26/2019 at 9:37 AM, rocmoc said:

This is rocmoc/Michael one of the first on this forum when the Joyner was one of the most active topics.  First an update of others.  The earlier members will also remember Lenny and Jeff.  With myself we organized the first Jamborees in 2009-2012.  Sadly if you have not heard we lost both Lenny and Jeff in 2018.    A great loss to the community.  Myself:  Still around but rolled over to Jeep and Arctic Cat Wildcat.  The Wildcat  design still remains me of my old 2008 Trooper.  Doing well as the Last Man Standing but cleaning out the garage.  Found some New and used Trooper parts I will list in the parts section.  Wanted to give you all a chance before I list on Ebay.  As many of you knew Lenny listed a lot of stuff on Ebay.  Will I partnered a lot of the stuff with him and I still have stuff.  Take care and I will check in for message should you want to ride.  Still make it to Utah every other year and am still in Southern AZ.

rocmoc in AZ/Mexico

Hey rocmoc, "mate", great hearing from you again, a blast from the past for sure. I rarely come on here myself now and are sadden to hear about Lenny & Jeff.  I stopped all dealings with Joyner immediately after the factory in China started ripping me off. I still love the T2s & R2s though and to this day still think the T2 is far better than most UTVs. I can't believe  Lenny & Jeff are both gone, Wow. I always used to fear the most with your trips into Mexico, so glad to see your still doing well.  I sell loads of parts for the Wildcat and Jeeps now too, so just for you I'll quote mates rates (cost) if you need something.  Mostly just accessories for the Jeep models. I'll P.M my email. 

  • Like 1
  • Alex pinned this topic
rocmoc Grand Master

rocmoc

Posted
  • Author
Posted

LOL, still doing the Mexico gig.  Never have had a problem I have not had in USA.  Thanks for the info on the Jeep & Wildcat.  Keep it up and be safe,

rocmoc n AZ/Mexico

  • Like 1
  • 3 weeks later...
kandlinaz Contributor

kandlinaz

Posted
Posted

Good to hear from ya Rocmoc!! Glad things are going well for ya...so sorry to hear about Lenny and Jeff. Hey, in all your cleaning, you didn't come across a water pump for the T2, did ya? We lost ours last weekend - probably the one and only part we didn't replace on the Joyner. Go figure....

  • 5 years later...
Ken rung Newbie

Ken rung

Posted
Posted

I'm new here and just bought a 2007 800cc trooper that is turboed.. I can figure out for the life of me how to get this monster into 4x4. I assume it's electronic. Any idea where to get both a owners and shop manual for this baby

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • rdc
      Joyner 1100 oil pressure problem.
      By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • nrggaragebuilds
      2004 Joyner Dirt Devil Missing “Prick gear”
      By nrggaragebuilds
      2004 250DL DIRT DEVIL. Hey y’all, I already know this is a long shot. But I am looking for a the “prick gear” assembly that makes reverse work for my external reverse gearbox. OEM PN D250.08.103 and its assembly. I bought the kart as a basket case, but I saw that the reverse box was present so I was optimistic.  Upon starting working on the buggy I realized there was a block off plate in plate of there the normal gear would be. If my understanding is correct that means the transmission no longer has reverse gear. I figured it’s just a standard bevel gear and I could probably find a gear to make work, but I don’t want to spend the time making all the other housing parts to shim the gear perfectly. Has anyone spare parts, or figured out an aftermarket solution from McMaster? I already know it’ll be a challenge to get this box to be happy again, but figured I would ask  
    • Firewalker918
      Anyone customized their uv34XL? Also, looking for seatcovers
      By Firewalker918
      I have a 2021 UV34XL and I am kind of looking to change it up from the orange wheels and maybe do a wrap?  Please share photos of any XLs that has been modified to look better and any seat covers recommended.thanks
       
    • HighSon
      Silent Rider Silencer Update
      By HighSon
      So for those of you who have dabbled in muffling your insanely loud Hisun, I just wanted to give an update on the Silent Rider Silencer project I reported on just short of 3 years ago. The silencer has failed from rust rot. So in the end, not a good investment. If I do a different one, pretty sure it will be stainless this time. 
      If others have tried other add-on mufflers or fixes beyond what’s already been reported, please post your experience.
    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...