Quantcast
Jump to content


Update of early Trooper Owners!!

rocmoc

By rocmoc
in Joyner UTV SxS Forum

 Share

Recommended Posts

rocmoc Grand Master

rocmoc

Posted
Posted

This is rocmoc/Michael one of the first on this forum when the Joyner was one of the most active topics.  First an update of others.  The earlier members will also remember Lenny and Jeff.  With myself we organized the first Jamborees in 2009-2012.  Sadly if you have not heard we lost both Lenny and Jeff in 2018.    A great loss to the community.  Myself:  Still around but rolled over to Jeep and Arctic Cat Wildcat.  The Wildcat  design still remains me of my old 2008 Trooper.  Doing well as the Last Man Standing but cleaning out the garage.  Found some New and used Trooper parts I will list in the parts section.  Wanted to give you all a chance before I list on Ebay.  As many of you knew Lenny listed a lot of stuff on Ebay.  Will I partnered a lot of the stuff with him and I still have stuff.  Take care and I will check in for message should you want to ride.  Still make it to Utah every other year and am still in Southern AZ.

rocmoc in AZ/Mexico

  • Like 2
Alex

Alex

Posted
Posted

Hi @rocmoc ! Thank you so much for the update, I was surprised/happy to see you back on here...You and a few others are responsible for bringing UTVBOARD to life, specifically driven by Joyner topics in the earlier days. Your contributions were always appreciated. I do hope you’ll stick around when you have time. Very sorry to hear about Lenny and Jeff. 

rocmoc Grand Master

rocmoc

Posted
  • Author
Posted

For certain, try to make it at least once during the winter.  We are always in the Motorhome with dirt bike and SxS or Jeep.  This winter my brother will be meeting us with his dirt bike and 5er.  Jan or Feb, not tied down yet.

rocmoc n AZ/Mexico (Michael)

Gerry Rookie

Gerry

Posted
Posted

We are in the Tyson Wells vendor area across from the discount grocers where K&B tools is at...ask anyone they know us. Know lots of cool rides here.

brostar Proficient

brostar

Posted
Posted
On 9/26/2019 at 9:37 AM, rocmoc said:

This is rocmoc/Michael one of the first on this forum when the Joyner was one of the most active topics.  First an update of others.  The earlier members will also remember Lenny and Jeff.  With myself we organized the first Jamborees in 2009-2012.  Sadly if you have not heard we lost both Lenny and Jeff in 2018.    A great loss to the community.  Myself:  Still around but rolled over to Jeep and Arctic Cat Wildcat.  The Wildcat  design still remains me of my old 2008 Trooper.  Doing well as the Last Man Standing but cleaning out the garage.  Found some New and used Trooper parts I will list in the parts section.  Wanted to give you all a chance before I list on Ebay.  As many of you knew Lenny listed a lot of stuff on Ebay.  Will I partnered a lot of the stuff with him and I still have stuff.  Take care and I will check in for message should you want to ride.  Still make it to Utah every other year and am still in Southern AZ.

rocmoc in AZ/Mexico

Hey rocmoc, "mate", great hearing from you again, a blast from the past for sure. I rarely come on here myself now and are sadden to hear about Lenny & Jeff.  I stopped all dealings with Joyner immediately after the factory in China started ripping me off. I still love the T2s & R2s though and to this day still think the T2 is far better than most UTVs. I can't believe  Lenny & Jeff are both gone, Wow. I always used to fear the most with your trips into Mexico, so glad to see your still doing well.  I sell loads of parts for the Wildcat and Jeeps now too, so just for you I'll quote mates rates (cost) if you need something.  Mostly just accessories for the Jeep models. I'll P.M my email. 

  • Like 1
  • Alex pinned this topic
rocmoc Grand Master

rocmoc

Posted
  • Author
Posted

LOL, still doing the Mexico gig.  Never have had a problem I have not had in USA.  Thanks for the info on the Jeep & Wildcat.  Keep it up and be safe,

rocmoc n AZ/Mexico

  • Like 1
  • 3 weeks later...
kandlinaz Contributor

kandlinaz

Posted
Posted

Good to hear from ya Rocmoc!! Glad things are going well for ya...so sorry to hear about Lenny and Jeff. Hey, in all your cleaning, you didn't come across a water pump for the T2, did ya? We lost ours last weekend - probably the one and only part we didn't replace on the Joyner. Go figure....

  • 5 years later...
Ken rung Newbie

Ken rung

Posted
Posted

I'm new here and just bought a 2007 800cc trooper that is turboed.. I can figure out for the life of me how to get this monster into 4x4. I assume it's electronic. Any idea where to get both a owners and shop manual for this baby

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • 180gtr
      Parting out Joyner Sand Viper 1100
      By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















    • Jody Deville
      Joyner 800 Renegade rear axles
      By Jody Deville
      I’m looking to best place to buy replacement axles for the rear in my buggy. Both axles are bad. Where is the best place to find them?
    • HighSon
      Silent Rider Silencer Update
      By HighSon
      So for those of you who have dabbled in muffling your insanely loud Hisun, I just wanted to give an update on the Silent Rider Silencer project I reported on just short of 3 years ago. The silencer has failed from rust rot. So in the end, not a good investment. If I do a different one, pretty sure it will be stainless this time. 
      If others have tried other add-on mufflers or fixes beyond what’s already been reported, please post your experience.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...