Joe Breaux

Don't feel bad. We have all done it. I recently. Had to replace a wheel on one of my Corvettes..It arrived in box, took it to tire shop, had the tire swapped over, balanced, installed on car..3 days later I realized...ITS A DIFFERENT WHEEL!... duh...Vendor won't take it back because I mounted tire..

TEMU....My sister ordered what appeared to be a TONKA size dump truck for her great grandson..I warned her but to no avail.. What arrived was a Hot Wheels size toy. NO RETURNS🥶

Good luck..hope it's cured

🤣

That's a head or gasket leaking combustion gases into water jacket.. New gasket in you future..glad we could help..Now try to find a place to work. If you take it in, expect long wait and big bill

Look for tiny bubbles in the coolant recovery bottle while running and normal temp or hot. Mine never got coolant in the oil but looked like Alka Seltzer in the recovery bottle.

Stuck float or trash blocking line?

Any results? For future upgrade

Been there..I had to pay to get it done because I had just had back surgery. Did not appear to be to difficult but after replacing gasket we realized the head was cracked..better check yours while it's off. This is a common issue on Hisun engine.I honestly think they don't torque the head bolts during assembly. None of mine were .good luck

I use my Massimo/Hisun 500 for hauling and dragging too.no issues yet with clutch. I do only use LOW gear tho

if theres steam, you have a gasket leak.. Unless the thing was submerged in water, theres no way water got in oil except a gasket or head leak.. It cant get in from rain no matter how hard it rains. I hope its not but .....let us know what happens.

Do you still have steam in exhaust ?

You have water in your oil...bad gasket or cracked head allowing water to enter the cylinder..then runs down to oil. Mine did it twice. Had to replace head to stop it.

I am very skeptical of anything from Lowes or Tractor Supply...Most have issues right away and very little Mfr support if any at all.

Welcome aboard...it is not normal. Idle too high? Clutch too tight? Will it shift with engine off? You can start engine in gear with brake depressed.

You have a blown head gasket

Should be easy to track the leak...wash everything and then run it.

Our 9 yr old Heinz 57 loves to ride in our UTV or on our ATVs too..he has a ball.

Open beer?

I have a Massimo MSU 500..Utv....Tractor Supply...I wish I had spent the extra $$$ and bought the Honda..I spent more repairing it in the first 3 months because Massimo doesn't honor their Warranty at all. Mine broke on first day at mile 00001.Spent $ 2k and 6 trips to shop to get to work. Massimo never paid a dime. So I highly recommend you ignore the "deals" at Lowes,Tractor Supply and Home Depot on the Chinese brands. I also have Honda and CF MOTO Atvs that are excellent machines.

Glad you are making progress. AS to CF MOTO, I have a 22 C Force that is a great machine .completely troublefree . Just sayin.

Critters find a way into most anything. I put a product called ONE BITE in my sheds. It works great. .

A tarp? It will take a fairly large shed to have a big enough door and tall enough. Those tend to be pricey.

I have a Massimo 500..It does well in the mud..I can't stay with the high dollar machines on flat land but it will stay with any of them in the slop.

Very good advice..we will try to assist with your problems but with anything Massimo the problems are many...speaking from my experience with them. I should spent the $2k extra for the Honda or CF MOTO