Quantcast
Jump to content


Recommended Posts

Posted

http://www.utvboard.com/topic/3168-joyner-parts-and-all-chery-and-lj276-engine-parts/?p=18349

4wd activator -- rocmoc -- New electric activator
Brake rotors -- rocmoc -- used set of the smaller rotors
Brake Master cylinder -- rocmoc -- New
Differential, rear -- Kinarfi -- Diff is damaged, but I believe it is still serviceable, and I think I did the upgrade, definitely the new bolts.2033865160104282158GxFLMD_th.jpg
Gaskets -- rocmoc -- used intake manifold gasket
Transmission -- rocmoc -- New set of shift cables
Transmission -- rocmoc -- used still good clutch with throwout bearing
Transmission -- rocmoc -- used still good short throw clutch slave cylinder

It should be noted that all parts are not for sale but just an inventory of what our group is hording.

If you have extra stuff others may need or can use. post it I'll move it here, alphabetically, and then delete your post so everything stays on one page. Or you can comment about this idea.
Kinarfi

  • 5 months later...
Posted

Reply and I'll post and alphabetize by main items

Please do not make inquiries on this thread, PM the person, this thread is for part only, if every one asks questions, the meat of the thread will get lost and buried.

Posted

We have 52 differentials fronts and rears of varying models, also complete ring and pinion sets, shim sets, bearings, 20 rear trooper CV driveshafts and 7 renegade rear CV driveshafts, 38 brake calipers loaded with brake pads for the troopers, 10 brake disks, I could go on and on, but thought you guys would need some of this stuff, I will snap and post pictures.. Also 1 transmission new for a 800/1100 Sand Viper, Fenders for the rear of troopers in every color, quite a few fronts, sides, winch plastic fronts

EDIT by Kinarfi -- These are all the new style fenders, From Joyner

Jarrad

(EDIT)

If you want something from Snowman6479, please PM Snowman rather than reply to this post.

Thanks,

Kinarfi

  • 6 months later...
Posted

Reply and I'll post and alphabetize by main items

Hi I have some Tropper 2 parts.

2 used rear fenders red

2 new rear fenders red

2 front stock rims

2 rear stock rims

a complete set of smaller rotors and calipers

a stock rear roll cage that goes over the motor

rear tail lights

I am looking for a rear end less crown and pinion, need spider gear washer and pin

I,ll be heading to Arizona around the 1st of Oct. and could bring parts down as I live in Kamloops BC Canada

Jerry 250-376-7694

  • 4 weeks later...
  • 1 month later...
Posted

" FOR SALE" I have the top & 8 lites for trooper 2, I didn't need the lites, so put on different alum. top. It also has air scoop. can email [email protected] for pics. I live in Idaho, don't know on shipping? would sell lites seperate from top.. ,,,,,,Quig

Posted

I"m interested in 1 front rim (for a spare tire), do you still have one? What's the price?

I have one rear rim that has a little more off set . It should work for the front. It would work to get you home as long as you are not jumping the buggy.The stock rims are a full set and do not want to break them up. I want fifty dollars for the rim . I believe it is a ITP rim. Sorry about the delay in replying as I was on the road. Jerry

  • 2 months later...
  • 3 weeks later...
Posted

Thats the color of my t2. I have all the fenders if your still needing them.

Hi guys just letting you know I have some extra parts if any ones interested 1 green camo hood for a commando new $100.00 ,one renegade dump bed new $150.00 ,one new trooper steering box has the play in it $35.00 ,one new alternator for the commando $80.00 ,one new digital dash for the commando $45.00 ,two complete taillight assemblies fits all $25.00 each ,and one set of soft doors for the commando new$60.00. If any one interested you can pm me. THANKS

  • 2 months later...
Posted

Not sure if this is the place to post this information, but I found it quite useful.

I was trying to find some auto rims that fit the Joyner and came accross this site: http://www.roadkillcustoms.com/hot-rods-rat-rods/Wheel-Bolt-Pattern-Cross-Reference-Database.asp?LugCount=5&StudSpreadInch=4.5&StudSpreadMM

I was looking for rims with a 4/114MM or 4.5inch bolt patten, I found several wheels that would work. The site has other useful information.

Hope y'all find it as informative as I did.

Dick

  • 11 months later...
Posted

I have the take-off coil-over shocks from the 650 Sand Spider, as well as the take-off winch, and the take-off air cleaner, carb, and intake.

I also got a screaming deal on Dorman universal CV boots, but I had to buy 12, so 8 are extra.

  • 3 months later...
Posted

I have two Headlight glass one with bulb one without. In good shape. I replaced mine with sealed beame instead cause I got tired looking for a halagen bulb...LOL I will post the new sealed unit number later...It is a VW I think it is a 5000 series 2 headlight car has high and low beam fits perfect.......Will sell the 2 to someone that is staying original..

  • 3 months later...
Posted

Sorry for the multiple posts to different threads....I should have posted here first.

Here is what I am in need of. JMC will have parts in Jan, but it is riding season and would like to get the Trooper up and running earlier...

Ref #. Part#. Description. Qty

1. QR512---1701101. Clutch case 1

2. 4T08A1---1701111. Transmission Case. 1

29. QR512---1701710. Reverse. Gear. 1

46. TR1100.03.03.02.00. Rear inboard slip drive. 1

  • 11 months later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • By Eman85
      I just purchased a Massimo MSU500 and no manual came with it so I have some questions. looking for part #'s and availability of basics like spark plug air and fuel filter. What is the valve adjustment specifications? 
        Is there a fuel drain? It's been sitting, low mileage but I want to drain out the old fuel and put fresh. 
×
×
  • Create New...