Travis

Before Crank un-installedPiston INSTALLED after honing.Crank installed after honing. Last pic is honed. Kind of blurry, took it with one hand. It looks better in person. It may not be professional quality but im 99.99999999999999999% sure it will work. Did better than I thought i would. So now, only ONE more obstacle. the crankshaft axial play adjustment BUT I need someones opinion ( i took the piston back out afterwards) not sure if you can see it, but in the picture with cylinder honed, it's almost right where the glare from the light is, and on top of the cylinder directly across from the spot, it looks like the hone didn't get ruffed up. any ideas? out of round cylinder, cylinder wore and needs bored??

What about us with no facebook? 👈

Yes, that is perfectly fine.

Yes it has brake lights and tail lights in one. It should turn on when you flip the light switch, and the brake light comes on when you press the brake pedal. Most models have a spring attached to the pedal that goes to a switch just above the pedal. And as far as i know, they don't have a horn,stock unless one is added . Do you mean while the engine is running, or just when you turn the key to the ON position? because the key has 3 positions. Off, On and Start (Engine). Welcome to the board and Congrats on your purchase of a great machine. If you need any parts look here: https://www.kawasakipartshouse.com/oemparts/c/kawasaki_utility_2007_prior/parts

Once i get the cylinder honed, the only remaining problem is the crankshaft shim.. And i have a few questions. 1. In the manual it gives a solution to the problem i'm having of the crank NOT spinning when the cover on (by hand). 2. And i just can't wrap what's left of my brain around the instructions, i guess use a caliper to measure? (instructions circled in red) (my brother has been helping me, he's fairly knowledgeable with this stuff, but more Diesel engines than anything) and he says to use a dial indicator set up, and to use this* as a spec for end play. and that would help us get the measurements needed in picture #2. 1st pic is the runout. But is it the same as crankshaft end play? 🤔 2nd pic is of the instructions (solution) to get the correct shim. I don't know, maybe this makes sense the way i wrote it. Thanks, Travis.

Yep, I bought 2 Wix filters just for that

I've noticed the Massimo MSU-500, The Cub Cadet Challenger 500 (550?) and the Benneche Bighorn 500 all look the same? Does one company make them and they just put their name on them?

Got the Hone, auto part store ordered it for me. 35$ I believe.

Got the piston pulled today to hone the cylinder. My friend's coming over tomorrow or Saturday to hone it. Gonna go ahead and replace the piston pin and snap rings.

The Polaris Ranger Crew 1000 XP 1000 has been completely reinvented for the 2019 model year with more than 100 updates based on input from consumers. 999cc Twin Towing Capacity: 2500 LBS Bed Capacity: 1000 LBS Ground Clearance: 13" Suspension Travel: 11" MSRP: $16,299 http://www.atv.com/blog/2018/04/2019-polaris-ranger-crew-xp-1000-unveiled.html

On my Kawasaki, I'd check it before every use (just because it's older) but waiting 5-10 minutes sounds about right.

A little history on my mule. Last year, i started tearing it down to rebuild the engine. I am almost done now, just need to hone the cylinder, and get a new shim for the crank and I'll be good to go (maybe!)

Oh, okay i get ya'. https://www.tradebit.com/filedetail.php/276553349-hisun-500-700-utv-efi-workshop-service-repair This might be it, but it costs 15.00 USD nevermind, that's for a 500/700

Do you mean for like oil changes and periodic Maintenance?

@aussie1 Is this what you are looking for? although it isn't for download i believe, https://www.manualslib.com/products/Hisun-750utv-5544837.html

http://www.pacificeagleutv.com/ranger-full-size-single-cab I believe this is the correct model. The owner of the site is a member on here @brostar

For 2018 KYMCO USA has introduced its new Hunter Edition family of off-road vehicles, which consists of three models – the UXV 450i LE Hunter, UXV 700i LE Hunter and MXU 700i LE Hunter. We’ve seen all of these machines before with the Hunter Edition branding, so they’re not exactly all new. However, what is new is KYMCO offering packages for its ATVs and UTVs specifically for hunters. ATVs and UTVs are a common sight at most hunt camps, so it’s not surprising to see KYMCO turning its attention to this market. Having an ATV or UTV on hand to haul out a hog or a deer, or just carry supplies to set up a food plot can be hugely helpful. So what do the Hunter Edition vehicles have to offer? Let’s have a look. Read more Here

Welcome the the UTV Board. https://www.polarispartshouse.com/ I have a lot of experience with Kawasaki partshouse, sister site of Polaris partshouse, run by the same people. Good customer service/returns.

Good, hope it works out for you! is it diesel or gasoline? I cant remember right now 😀

Where DST is in effect set your clocks ahead 1 hour!😁

I would.

Bungee cords. The only thing CLOSE to duct tape. That how all my accessories were attached on mine!

How long is the "trip"? Take a tool set. Sockets, Screw drivers etc. First aid kit. Water ,snacks,. Extra fuel. maybe some extra oil too. If it all possible let someone know when you plan to return.

Could i borrow $20,500 from anybody? I'll pay it back within a couple of months, or years. 😁

@Alex