Quantcast
Jump to content


Recommended Posts

Posted
On 3/27/2020 at 10:15 PM, Daniel Tully said:

Just from an engineering / manufacturing point of view (I'm electrical, so grain of salt here) the cover should be a stamped piece, or maybe even molded - same difference, you make one and then you make 10000. the steering shaft, now that has to be cut, maybe turned, maybe threaded, Someone has to touch each one - that's the part that's going to be as rare as TP (sorry) - Since i got ya, I have put every incentive dollar into dressing my pro-fx out; adventure package and curtis plow. I am coming unglued waiting for it.

Incentive dollats of 500 parts and 500 cash dont go far. 

Posted

I have a Pro Ranch Edition paid for in early Feb. Took advantage of all the incentives for lights and cover. Our dealership is closed here in California but may do the service if the parts come in. Really frustrating waiting this long and the only info we're getting is off of forums like this.   

Posted
1 hour ago, Bruce40 said:

Incentive dollats of 500 parts and 500 cash dont go far. 

Especially when you live in Illinois and they charge a tax of over 6% on rebates.

Posted

I believe the issue Kawasaki was initially having was they cannot post a Recall until approved by the Feds. Through December and January, the Feds were very slow to respond to the paperwork. Once they got it approved, the second approval was very quick. Now just to wait on the parts

 

  • Like 2
Posted
2 hours ago, Bruce40 said:

Incentive dollats of 500 parts and 500 cash dont go far. 

It's a number they picked, oddly enough the lowest number they could and still keep some customers - personally, I got $500 accessory, 500 cash, 500 time to ride, 500 Kawi Kash and 250 veteran discount. it doesn't make the waiting any easier, but...

Posted

I want to take a moment to thank each and every forum member who have posted on this thread. You guys have provided me with so much more information than my dealer or Kawasaki. I would be remiss if I didn't mention a couple of chuckles along the way as well.

I truly appreciate your taking the time and making the effort to share the information you have gathered. 

  • Like 1
Posted

A recall is a big deal, some more than others. I started in a medical device manufacturer and still want to say the 'R word'. The conspiracy part of me thinks they knew about the steering shaft for a while and just told people 'you were abusing it'.  Later, they started getting reports of fires in the winter 'I  was just pushing snow and it started on fire' is a hard argument. so now you have to talk to the gov't, who you tell the second week 'since we're such a responsible company, and we already have the paperwork going - give us a chance to fix this steering shaft that people are abusing'. I would guess they had the tooling drawn up and scheduled the time at the factory before December for delivery in Feb/Mar. Then things didn't quite work out... for any of us.

Posted
1 hour ago, Volzalum said:

I believe the issue Kawasaki was initially having was they cannot post a Recall until approved by the Feds. Through December and January, the Feds were very slow to respond to the paperwork. Once they got it approved, the second approval was very quick. Now just to wait on the parts

 

My suspicion is that Kawi knew they had the steering issue so they stalled the first recall on purpose  (utilizing slow government process to their advantage) until steering fix was figured out.  The part they didn’t anticipate is the Coronavirus messing up their cheap manufacturing sources.  I bet they could have paid more to another manufacturer and already have parts, but now Coronavirus has the whole world messed up.

  • Like 1
Posted
11 hours ago, Daniel Tully said:

It's a number they picked, oddly enough the lowest number they could and still keep some customers - personally, I got $500 accessory, 500 cash, 500 time to ride, 500 Kawi Kash and 250 veteran discount. it doesn't make the waiting any easier, but...

what is $500  kawi kash? thanks

 

Posted
8 minutes ago, bartelso1975 said:

what is $500  kawi kash? thanks

 

I went to a motorcycle show and got a voucher/coupon that I had to validate online - when I told the dealer i went to the show, he sighed and said 'let me guess..' - That's when I said I wanted the veterans discount too. Guess i can't claim to never even taken a free meal for being a vet anymore. Oddly enough, they never asked me for the online code. 

Posted (edited)
4 hours ago, Daniel Tully said:

I went to a motorcycle show and got a voucher/coupon that I had to validate online - when I told the dealer i went to the show, he sighed and said 'let me guess..' - That's when I said I wanted the veterans discount too. Guess i can't claim to never even taken a free meal for being a vet anymore. Oddly enough, they never asked me for the online code. 

good for you and thanks for your service to our country 

Edited by bartelso1975
spelling
Posted
4 hours ago, Daniel Tully said:

I went to a motorcycle show and got a voucher/coupon that I had to validate online - when I told the dealer i went to the show, he sighed and said 'let me guess..' - That's when I said I wanted the veterans discount too. Guess i can't claim to never even taken a free meal for being a vet anymore. Oddly enough, they never asked me for the online code. 

I say it wasn't free. It was earned!

Posted
On 4/4/2020 at 11:20 AM, West 5757 said:

Do you go by and put your face to the window and mourn a few days a week? If mine wasn’t in the back I would have a bench set up. 

Yes Indeed went today lol

Posted
59 minutes ago, 2-8 said:

My dealer told me today (April 9) that 300 kits have made their way into the country but they didn't get even one.

I wonder how many units they have sold already waiting for the kits? Surely we will be the ones getting them first?

Posted
58 minutes ago, West 5757 said:

I wonder how many units they have sold already waiting for the kits? Surely we will be the ones getting them first?

I can't remember the number, but they did give me one. It was for sure between 2000-3000. I made the comment I was surprised it wasn't more than that. They said many people gave up and went to something else including two of their customers. 

I guess many people don't have our patience (or ignorance) depending on how you look at it. Lol!

Posted

My dealer (Illinois) recieved three kits today. Unfortunately,  I am number seven in line to get one. At least things are finally starting to happen.

Posted
2 hours ago, 2-8 said:

My dealer (Illinois) recieved three kits today. Unfortunately,  I am number seven in line to get one. At least things are finally starting to happen.

That is awesome!! I didn’t expect any to be dispersed until the end of summer!! There is hope!!!!

  • Thanks 1
Posted
2 hours ago, 2-8 said:

My dealer (Illinois) recieved three kits today. Unfortunately,  I am number seven in line to get one. At least things are finally starting to happen.

where at in illnois is your dealer- my dealer is in salem illinois

 

Posted
3 hours ago, 2-8 said:
Just now, 2-8 said:

They are located in Nashville, Illinois. 

My dealer (Illinois) recieved three kits today. Unfortunately,  I am number seven in line to get one. At least things are finally starting to happen.

where at in illnois is your dealer- my dealer is in salem illinois

hohlzauers  is that steering recall parts- did the dealership tell you that? dang I would think atv's and more would get some soon. keep me updated and thanks

Posted
2 minutes ago, bartelso1975 said:

where at in illnois is your dealer- my dealer is in salem illinois

hohlzauers  is that steering recall parts- did the dealership tell you that? dang I would think atv's and more would get some soon. keep me updated and thanks

A while back they told me they had the parts for the breather issue in stock. The three kits they recieved are for the steering issue. They said they would be installing all parts immediately  and I have now moved from number 7 to number 4. I will be happy to post when I hear anything else. Good luck!

  • Like 1
Posted
Just now, 2-8 said:

A while back they told me they had the parts for the breather issue in stock. The three kits they recieved are for the steering issue. They said they would be installing all parts immediately  and I have now moved from number 7 to number 4. I will be happy to post when I hear anything else. Good luck!

thanks for the info - I will let you know if we get our mule - happy easter

  • Like 1
Posted

I spoke to my dealership yesterday - they actually called me.  They have more than 20 units sold waiting on the parts, but they told me I am near top of list based on my purchase date - I guess they are treating parts as first sold, first gets parts,  Anyway, they told me parts are shipped and should be here next week at latest if they don’t arrive today or tomorrow.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 
    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • By Pick a name
      The Axis 500 will not shift into low or reverse.  I have high when it should be in low and all the other places it is reverse.  The gears in the shift cover are fine and I shifted it when the cover was off and yet no change (so it can't be the shifting mechanism gears).  I t has been difficult to get it into low for awhile.  But now it is either high or reverse, no neutral either.
    • By KWinTX
      I just bought a new 2024 Hison 550 Stryker 2 months ago. this is the second time I have had this issue.  It only has about 20 hours on it. The last time it happened we took it back to the dealer. it was a fuse.  Since we live three-hour time driving there and back. I would like to find another solution if possible.  I have tried all the fuses that seem to have anything to do with starting.  Currently checking the battery. The battery is new. it came with the unit. It is probably 6 months old.  the UTV has all power to everything electrical. lights turn signals and radio all work.  When trying the key to start . it is 100% dead. as in it doesn't even click.  There is a low whirring like the fuel pump is turning on though. The Unit was running and driving just fine.  we shut it down for the night. The next morning my wife found it in this condition.  Thanks for any Ideas or solutions???   Otherwise, it goes back to the dealer tomorrow. Just hope I didn't buy a lemon. Great little UTV when it does run.😅  anyone else ever have this Issue..? 
×
×
  • Create New...